Owner's manual

EN
 Charger adapter output: DC 5V
 Mini 5 Pin USB Plug charging Port
 Minimal charging time: 2 hours
 Talk time: Up to 8 hours
 Standby time: Up to 90 hours
 Operating Temperature: -10℃ - 45℃
 Storage Temperature: -25℃ - 60℃
Basic Operations
 Please put your mobile phone within 1m of your headset.
 Press the power button until you see the blue LED light and the red light flashing
quickly. This indicates that BTHS02 entered into pairing mode.
 Open the Bluetooth function on your mobile phone or PC, and search for the
Bluetooth device (CNA-BTHS02). If successfully paired, the blue light will flash
twice every 6 seconds; If failed, please repeat the operation.
 When you have an incoming call, you will hear an indicator sound in the
headset. Press the power button once to answer, or answer the call directly with
your mobile phone. Repeat to end the call.
 This headset can support last calling recall. Simply press the power button and
hold for 2 seconds.
 To decline an incoming call: Press and hold the centre button for 2 seconds, then
release. There will be a beep when you let go indicating the operation was
successful.
 Double-click the power button to activate the voice command feature.
 Enjoy music: Press and release the power button to Play/Pause the music. Press
Up and release the power button for the previous song or press Down and
release to listen to the next song. Press the power button Up or Down quickly to
adjust the volume.
 For mobile phones: The music will pause if there is an incoming call, and will
automatically start again when the call ends.
 The headset will go automatically into standby mode after a short period of
inactivity.
 If the headset disconnects from the PC or mobile device, press the power button
to reconnect within 10 minutes so you don’t have to pair again. If the contact
was lost for more than 10 minutes, the headset will power off automatically,
which means you will need to start the headset again.