User manual

EN - 9
Device Configuration
Before setting up the device, please make sure that the host PC(s) is set on the IP
sub-network accessible by CANYON CNP-WFAP device. The default network
address of the device is set as 192.168.1.1. Please configure IP address of host PC
at 192.168.1.XXX where XXX is a number between 002 and 254. The subnet mask
should be 255.255.255.0. Please follow below steps to enter web browser
management mode.
1. Open a browser
(Internet Explorer
browser only) and
type in “192.168.1.1”
at the address bar and
press Enter.
2. Type “guest” at the
user name text box
and “guest” again at
the password text box.
3. The home page of web
browser management
mode will be displayed.
4. Click on 8 different
functions on the main
router menu on the
left. The corresponding
information will be
displayed at right.
5. Click on Help at any
time to bring up help
menu.
NOTE:
The factory settings of user name and the password are by default “guest”. It is
recommended that user change that information to better maintain network
security.