User`s guide
Table Of Contents
- Introduction
- Connecting a computer
- Displaying a computer image
- Connecting a video device
- Displaying a video image
- Shutting down the projector
- Troubleshooting your setup
- Using the keypad buttons
- Using the remote control
- Using the audio
- Optimizing computer images
- Presentation features
- Optimizing video images
- Customizing the projector
- Using the menus
- Maintenance
- Appendix
- INDEX
11
Adjust the zoom or focus rings by rotating them until the desired image size
and focus are produced.
If the image is not square, adjust the vertical keystone using the buttons on
the keypad.
Press the upper Keystone button to reduce the upper part of the image, and
press the lower Keystone button to reduce the lower part.
You can also adjust the keystone via the menus. See page 25.
Adjust the volume on the keypad.
Adjust the Contrast, Brightness, Color, or Tint in the Picture menu.
See page 24 for help with the menus.
adjust zoom and focus
focus
zoom
adjust keystone
adjust volume
adjust Picture menu