Service manual

Drive Mechanism GV 30…, GV 50…
k
5 - 22 GRUNDIG Service
8.2 Disassembling the Cassette Mechanism (0090)
– Remove the cassette mechanism (0090, see point 8.1).
– Press the lid opening lever (040E, Fig. 8.3) to release the lock and
lower the tray (040A, Fig. 5.1).
– Unhook the spring (0700, Fig. 8.4).
– Move the cassette drive slide (0600) fully backwards and remove it
from the right stand (0200, Fig. 8.4).
– Subsequently the door opener lever (0500) can be removed
(Fig. 8.4).
Stand r
0200
Door opener lever
0500
0700
Cassette drive slide
0600
Fig. 8.4
Notes on lubricating the cassette mechanism (0090)
– Use only grease, part no. 75988 061 7800 for lubricating the cassette
mechanism.
– Follow the instructions given in Fig. 8.5 – Fig. 8.10!
0100 Stand l
Apply grease (75988 061 7800) at the inner surface
Fig. 8.5
0100 Stand l
Apply grease
(75988 061 7800)
to the side
Fig. 8.6
0200 Stand r
Apply grease
(75988 061 7800)
to the inner surface
Apply grease (75988 061 7800) to
the part in contact with the cassette
drive slide.
Fig. 8.7
Apply grease
(75988 061 7800)
Apply grease
(75988 061 7800) to the side
Apply grease
(75988 061 7800)
to the inner surface
Apply grease
(75988 061 7800)
0200
Stand r
Fig. 8.8
Apply grease (75988 061 7800)
Apply grease
(75988 061 7800)
0600 Drive slide
Fig. 8.9
Apply grease (75988 061 7800)
0500 Door opener lever
Fig. 8.10