Service manual

GV 30…, GV 50… Allgemeiner Teil / General Section
GRUNDIG Service 1 - 27
22
10 Use the »
C D
F E
« buttons to move the highlighted station to the
required channel position and then press »OK « to confirm.
To move other television stations, repeat steps
9 and 10 .
11 Click » i INFO« to save the setting.
– The »CLOCK« appears.
Check the date and time.
Note:
If the clock was not updated automatically, set it manually, referring to the
section ”Setting the date and time” on page 63.
12 Conclude the setting by pressing » i INFO«.
Note:
Further settings – such as manual search or subsequently changing the order
of television stations, deleting stations from the station table or naming a
station – are described starting on Page 54.
If the VCR-SAT module is connected after the initial installation of the video
recorder, you must repeat the setting.
The menu required for this procedure, »AUTO INSTALLATION«, can be
called up by pressing »
*
P« and » P
Ü
« on the video
r
ecor
der
simultaneously until the menu appears.
TUNING
_______________________________________________________________________________________
MOVE 1/6
1ARD 17C23 13SAT03
2ZDF 18C24 14SAT04
3RTL1 19C31 15SAT05
4RTL2 10C47 16SAT06
5SAT1 11SAT01 17SAT07
6PRO7 12SAT02 18SAT08
SELECTED :ARD
ɶʺ
<> :SELECT
OK :ENTER INFO:EXIT
CLOCK
TIME DATE YEAR
12:–– ––/–– ––
*
0-9 :DATA
<> :SELECT
ɶʺ
:CHANGE
INFO :EXIT
24
PLAYBACK
___________________________________________________________________________
Additional playback functions
Calling up information
1 Press the »OK« button to call up information.
– »USED« is the elapsed playing time on the tape
– »REM« is the remaining playing time
– »0:00:00« is the tape counter in hours, minutes and seconds
– The date and time
To set the tape counter to »
0:00:00 « press »CLEAR«.
Fast forward/rewind
1 Press »■ « to stop the tape.
2 Press » ľľ « to rewind the tape or »
ıı
« to fast forward.
Double playback speed
1 Press »
ı
« during playback.
2 Press »
ı
« again to return to normal playback speed.
Slow motion
1 During freeze-frame (playback/pause) press and briefly hold down »II «.
2 Press »
F
« or »
E
« to alter the slow-motion speed.
3 Press »
ı
« to return to normal playback speed.
Frame-by-frame playback
1 During freeze-frame (playback/pause) press »II « repeatedly.
2 Press »
ı
« to return to normal playback speed.