Service manual
Allgemeiner Teil / General Section GV 30…, GV 50…
1 - 32 GRUNDIG Service
56
SPECIAL SETTINGS
____________________________________________________________________
Skipping television stations
When you are selecting television stations using the »
C
« or »
D
« buttons, this
function enables you to skip one or more stations.
Preparation
Switch on the television.
Select the channel position »AV« on the television for the video recorder.
Setting
1
Press »
i
INFO« to call up the main menu.
2
Select the »INSTALL« line using »
C
« or »
D
« and activate by pressing
» OK «.
3
Highlight the »CHANNEL SELECTION« line by pressing » OK «.
4
Highlight the »CHANNEL PRESET« line by pressing » OK «.
– The station tuning menu appears on the screen, and the »PRESET« line is
highlighted.
5
Using »
F
« or »
E
«, select the station you want to skip.
6
Select the »SKIP« line using »
C
« or »
D
«.
7
Select » ON« by pressing »
F
«.
8
Press » OK « to save the setting for that station.
9
Press »
i
INFO« to conclude the setting.
Note:
If you later decide that you do not want to skip the station, repeat the setting
and at Step 7 select »OFF« by pressing »
E
«.
MENU
TIMER
MODE
INSTALL
ɶʺ
: SELECT
OK :ENTER INFO:EXIT
■
➔
PRESET ARD 01
CHANNEL C06
SOURCE C/S
FINE TUNING
‹›
SKIP OFF
DECODER OFF
0-9 :DATA
ɶʺ
:SELECT
<>
:CHANGE
OK :ENTER INFO :EXIT
PRESET ARD 01
CHANNEL C06
SOURCE C/S
FINE TUNING
‹›
■
➔
SKIP ONON
DECODER OFF
ɶʺ
:SELECT
‹›
:CHANGE
OK :ENTER INFO:EXIT
ENGLISH
57
SPECIAL SETTINGS
____________________________________________________________________
Setting television stations from the antenna or the
cable system
Preparation
Switch on the television.
Select the channel position »AV« on the television for the video recorder.
Setting
1
Press »
i
INFO« to call up the main menu.
2
Select the »INSTALL« line using »
C
« or »
D
« and activate by pressing
» OK «.
3
Highlight the »CHANNEL SELECTION« line by pressing » OK «.
4
Highlight the »CHANNEL PRESET« line by pressing » OK «.
– The station tuning menu appears on the screen, and the »PRESET« line is
highlighted.
Note:
If the television picture makes it difficult to see the menu, press » DUB« and it
will appear on a blue background.
5
Press »
F
« or »
E
« or » 0 ... 9 « to select the channel number for the new
television station.
6
Select the » SOURCE« line by pressing »
C
« or »
D
« and select » C/S« by
pressing »
F
« or »
E
«.
7
Select » CHANNEL« by pressing »
C
« or »
D
«.
Switch from normal channels (Display: »C«) to special/hyperband channels
(Display: »S«) and back by pressing »MONITOR«.
8
Enter the two-digit channel number using the » 0 ... 9 « buttons;
or
start an automatic search by pressing »
F
« or »
E
«.
■
➔
PRESET ----- 21
CHANNEL C 49
SOURCE C/S
FINE TUNING
< >
SKIP OFF
DECODER OFF
0-9 :DATA
ɶʺ
:SELECT
<>
:CHANGE
OK :ENTER INFO :EXIT
PROGRAM ----- 21
■
➔
CHANNEL C 49
SOURCE C/S
FINE TUNING
< >
SKIP OFF
DECODER OFF
MON.
:C/S 0-9 :DATA
ɶʺ
:SELECT
<>
:CHANGE
OK :ENTER INFO :EXIT
■
➔
PRESET SKY 20
CHANNEL C 46
SOURCE C/S
FINE TUNING
< >
SKIP OFF
DECODER OFF
0-9 :DATA
ɶʺ
:SELECT
<>
:CHANGE
OK :ENTER INFO :EXIT