Service manual

Allgemeiner Teil / General Section GV 30…, GV 50…
1 - 34 GRUNDIG Service
SPECIAL SETTINGS
____________________________________________________________________
60
Setting television stations from the VCR-SAT module
Preparation
Switch on the television.
Select the channel position »AV« on the television for recorder playback.
Setting
1 Press » i INFO« to call up the main menu.
2 Select the » INSTALL« line using »
C
« or »
D
« and activate by pressing
» OK «.
3 Highlight the »CHANNEL SELECTION« line by pressing » OK «.
4 Highlight the »CHANNEL PRESET« line by pressing » OK «.
– The station tuning menu appears on the screen, and the »PRESET« line is
highlighted.
Note:
If the television picture makes it difficult to see the menu, press » DUB« and it
will appear on a blue background.
5 Select the desired channel position, where a new satellite station is to be set,
with the »
F
« or »
E
« buttons.
6 Select the » SOURCE« line by pressing »
C
« or »
D
« and select the » SAT«
display by pressing »
F
« or »
E
«.
7 Select the » SAT-MODULE« line with »
C
« or »
D
« and activate » MENU«
by pressing »
F
« or »
E
«.
– A menu with the station data of the selected satellite station appears on the
screen. The »FREQU.« line is highlighted.
MENU
TIMER
MODE
INSTALL
ɶʺ
: SELECT
OK :ENTER INFO:EXIT
PRESET SAT15 31
CHANNEL SAT01
SOURCE SAT
■
➔
SAT-MODULE MENU
SKIP OFF
ɶʺ
:SELECT <> :CHANGE
OK :ENTER INFO :EXIT
PRESET SAT15 31
CHANNEL SAT01
■
➔
SOURCE SAT
SAT-MODULE MENU
SKIP OFF
ɶʺ
:SELECT <> :CHANGE
OK :ENTER INFO :EXIT
SPECIAL SETTINGS
____________________________________________________________________
ENGLISH
61
– The menu offers the following settings for the satellite station.
PROGRAM 15 Channel number of the selected satellite
station.
FREQU. 109640.0 MHZ Station frequency of the satellite station.
POL/ANT: HOR A LOW LNB settings:
Polarisation HOR (horizontal)
VER (vertical);
Satellite selection A (for example, ASTRA)
or B (for example, Eutelsat);
LOW = lower frequency band;
HIGH = upper frequency band.
AUDIO 7.02/720 MHZ Left/right audiofrequency.
MODE STEREO Set sound type (STEREO, MONO, 50µS,
75µS, J17).
Set the sound to obtain optimal sound
quality.
AUDIO BW 110 KHZ Band width setting. Set the sound to obtain
optimal sound quality.
DECODER ON/OFF Decoder for coded satellite stations
on/off.
LNB LO1 9.750 GHZ Oscillator frequency of the satellite
receiver (LNB).
CONTRAST (32) Modify picture contrast of the selected
satellite station. Set to obtain optimal
picture quality.
8 Enter the frequency directly with » 0 ... 9« or
change the frequency step-by-step with »
F
« or »
E
« or
Press » INDEX« until the ”new” satellite station appears on the screen.
PROGRAM 15
■
➔
FREQU. 10964,0 MHZ
POL/ANT. HOR A LOW
AUDIO 7,02/7,20
MHZ
MODE SSTEREO
AUDIO BW 110 KHZ
DECODER OFF
LNB LO 1 9 , 750 GHZ
CONTRAST 2 (32)
ŃĽ
:SELECT
ľı
:CHANGE
OK :ENTER INFO:EXIT