Service manual
GV 30…, GV 50… Allgemeiner Teil / General Section
GRUNDIG Service 1 - 35
SPECIAL SETTINGS
____________________________________________________________________
62
9
Select the station data you wish to modify with »
C
« or »
D
« and enter the
new data directly with »0 ... 9« or modify with »
F
« or »
E
«.
Note:
To go back to the previous menu – without saving the modifications – press
»
i
INFO«.
10
Save modifications with » OK«.
– The video recorder automatically switches back to the previous menu
display and automatically selects its next channel position.
11
Press »
i
INFO« to finish the setting.
ENGLISH
63
SETTING THE DATE AND TIME
____________________________
Automatically updating the date and time
If channel number 1 on the video recorder is tuned to a station with teletext, the
video recorder uses this to update its internal clock.
The update takes place every Sunday between 3 A.M. and 6 A.M., thus
enabling the video recorder to recognise the switches to and from daylight
saving time.
Setting the time and date manually
1
Switch on the television and select the channel position »AV« on the
television for the video recorder.
2
Press »
i
INFO« to open the main menu.
3
Select the »INSTALL« line with »
C
« or »
D
« and then press » OK « to
confirm.
4
Select the »CLOCK« line using »
C
« or »
D
« and then press » OK « to
confirm.
– The »CLOCK« menu appears with the »TIME« item highlighted.
5
Enter the time as four digits using » 0 ... 9 «.
6
Enter the date as four digits using » 0 ... 9 «.
7
Enter the year as two digits using » 0 ... 9 «.
Note:
– »
*
« in the menu means that the clock is updated automatically. To disable
this function highlight »
*
« using »
E
« and then press »
C
« or »
D
« to
switch it off (» –« appears in the display).
8
Press » OK « to conclude the setting.
CLOCK
TIME DATE YEAR
12:–– ––/–– ––
*
0-9 :DATA
<>
:SELECT
ɶʺ
:CHANGE
INFO :EXIT
CLOCK
TIME DATE YEAR
12:00 10/5 00
*
0-9 :DATA
<>
:SELECT
ɶʺ
:CHANGE
OK :ENTER INFO :EXIT