Service manual

GV 30…, GV 50… Drive Mechanism

GRUNDIG Service 5 - 21

8. Replacing Parts of the Drive Mechanism

Note: The replacement of the mechanical parts described below is

based on the assumption that the drive mechanism is already

dismantled (see page 1-6).

The drive mechanism is to be built in exclusively in the Eject

position. For this position all gear wheels, levers and the mode

switch S3500 as they are in Eject mode (Fig. 8.1 and 8.2).

Fig. 8.1

Fig. 8.2

Align the positions

Mode switch

8.1 Removing the Cassette Mechanism (0090)

– Undo 2 screws (6073, Fig. 8.3).

– Lift the back of the cassette mechanism (0090) by a small amount,

slide it backwards and remove it.

Note: When reassembling the cassette mechanism (0090) the

lever (60900) must be pressed towards the front. The

cassette mechanism (0090) is positioned correctly when

the two hooks A and the dowels B engage with the holes

C (Fig. 8.3).

Cassette mechanism 0090

6073

Loch

Lever 60900

Lever, lid opener

040E

Fig. 8.3