User Manual

Controller Fault and Glossary of Terms

MC19-1.20

2. Press up  to select level 2. After a short pause the display will show “Access Pass

code”.

3. Press up  or down  to enter the pass code 9, Pass is momentarily displayed.

After a short pause the display will return to home, the controller is now in level 2.

When Level 2 operations have been completed the supervisor must return to Level 1

manually. It is not necessary to enter a code when going from a higher level to a lower level.

To Return to Level 1:

1. Press and hold page  for 3 seconds. The display will show “Access Goto Level 2.

2. Press down  to go to level 1. After a short pause the display will revert to home, the

controller is now in level 1.