User guide
10. NOTICES
Federal Communications Commission (FCC) Statement
15.21
You are cautioned that changes or modications not expressly approved by the part responsible for
compliance could void the user’s authority to operate the equipment.
15.105(b)
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment o and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Operation is subject to the following two conditions:
1) this device may not cause interference and
2) this device must accept any interference, including interference that may cause undesired operation
of the device.
FCC RF Radiation Exposure Statement:
This equipment complies with FCC/IC radiation exposure limits set forth for an uncontrolled environment.
End users must follow the specic operating instructions for satisfying RF exposure compliance. The
antenna used for this transmitter must not transmit simultaneously with any other antenna or transmitter,
except in accordance with FCC/IC multi-transmitter product procedures.
Industry Canada (IC)
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the
following two conditions:
1) this device may not cause interference and
2) this device must accept any interference, including interference that may cause undesired operation
of the device.
IC RF Radiation Exposure Statement:
This equipment complies with the RSS-102 exemption from routine RF exposure evaluation for use in an
uncontrolled environment.
European CE Notice
Your Cardo product (the “Product”) is in conformity with the following essential requirements of
Council Directive 1999/5/EC (referred to as R&TTE Directive): Articles 3.1a, 3.1.b and 3.2. The Product is
manufactured in accordance with Annex II of the above directive.
Declaration of Conformity (DOC)
The Product is compliant with and adopts the Bluetooth® Specication 3.0. Class 1 + EDR and has
successfully passed all interoperability tests that are specied in the Bluetooth® specication. However,
interoperability between the device and other Bluetooth®-enabled products is not guaranteed.
Copyright
The contents of this User Guide, including all text, illustrations and drawings are the exclusive intellectual
property of Cardo Systems, Inc. (the “Company”) and are protected by copyright laws. They are not in the
public domain. Any partial or total reproduction, translation and or dissemination, without the prior written
authorization by the Company are strictly prohibited. Any rights not expressly granted herein are reserved.
IMPORTANT SAFETY AND WARRANTY INFORMATION –
WAIVER AND GENERAL RELEASE
WARNING:
Cardo Systems Inc., (“Cardo” or the “Company”) noties you that your complete and undivided attention
is required when using a communication device (the “Product”) while riding. Failure to avoid potentially
hazardous situations could result in accident resulting in serious injury or death.
Cardo advises you to take all necessary precautions and remain alert to the trac, weather and all road
conditions. It is best to stop away from trac prior to activating or deactivating the Product or initiating
or receiving any calls.
Do not perform pairing, linking or similar operations while riding. All publications are intended to address
technical capabilities and should not be construed as encouraging the operation of Cardo’s Products in any
manner that is unsafe or prohibited by law.
Exercise all due caution while using this Product and obey all applicable trac laws. Always ride and use
the Product in a safe manner. Do not become distracted by the Product while riding on a vehicle. When
riding, always consider road, trac, terrain and other conditions to maximize safety. Do not operate the
Product if it becomes unsafe to do so.
In some regions or states, the use of mobile communications systems is prohibited or restricted. Check all
laws and regulations that apply to your region before using the Product and be mindful that compliance
with all laws and regulations is the user’s responsibility. Use the Product in motion only where and
in the manner that such devices are permitted by applicable law. The Product should not be used in
contravention of local, state or federal laws and regulations. Please check federal, state and local laws
and regulations before using your Cardo Product.
No part of the body should come in contact with the antenna during operation of the equipment. Use
Product only where safe, and avoid usage at gas stations, fuel depots or around explosives. Use with
hearing aids and medical devices only after consulting a physician or specialist. Make sure to install and
mount the Product in a stable manner.
16
| scala rider
®
G9x / G9x PowerSet