User guide
Voice Command performance may vary based on environmental
conditions including driving speed, helmet type and ambient noise.
For improved performance of the Voice Command feature,
minimize wind impact on the microphone by using the large
microphone sponge and closing the visor.
4.5 VOICE CONNECT (VOX)
The scala rider G9x oers VOX technology for safe and hands-free
operation of some key functions.
You can set VOX to either start an intercom call or activate the
Voice Command.
VOX Activation Speak any word loudly into the microphone
Answer a call Speak any word loudly into the microphone
Reject a call Remain silent for about 15 seconds
VOX Sensitivity
(Default: Medium)
See section 3 to adjust settings.
High: Use this setting if it is dicult to activate VOX
Low: Use this setting if it is too easy to activate VOX
VOX Operation
Mode
VOX can be set to activate the Voice Command
(default) or to start an Intercom Call. See section 3
to adjust settings.
Enable/Disable
VOX (For Intercom/
Voice Command
only)
In Standby, press and simultaneously for
2 seconds
• Enable: Blue ash for 2 seconds
• Disable: Red ash for 2 seconds
5. INTERCOM
The scala rider G9x allows full duplex intercom communication at a
range of up to 1.6 km (subject to terrain and within line of sight).
Open the antenna for maximum range
To chat with someone via Intercom, rst pair your scala rider G9x to
the second unit. Pairing is a one-time process. Once paired, the units
should automatically recognize each other whenever in range.
If you have purchased the scala rider G9x PowerSet, the box contains
two factory-paired units congured to communicate via Channel “A”.
Intercom Compatibility
Your scala rider G9x is compatible with all scala rider intercom
models. In addition, it is also compatible with the cardo SHO-1 and
Schubert’s SRC-System™. Intercom range with other models is limited
to the distance of the device with the shorter range. For more info
please visit www.cardosystems.com/G9xcompatibility.
English
scala rider
®
G9x / G9x PowerSet |
7