Datasheet

Specifications are subject to change without notice (28.02.2007) 1
Solid State Relays
PCB, 1-Phase ZS/IO
Types RP1A, RP1B
•AC Solid State Relay for PCB mounting
•Zero switching or instant-on
•Rated operational current: 3, 5 or 5.5 AACrms
•Rated operational voltage: Up to 480 VACrms
•Surface mount technology
•Flexible encapsulation for extended life
•Control voltage: 3 to 32 VDC* / 16 to 32 VAC**
•Opto-isolation: > 4000 VACrms
•Blocking voltage: Up to 1000 V
p
•Non-repetitive surge current: Up to 250 A
p
Product Description
Ordering Key
Solid State Relay (PCB)
Number of poles
Switching mode
Rated operational voltage
Control voltage
Rated operational current
Rated operational Non-rep. voltage Control voltage Rated operational current
voltage 3 AACrms 5 AACrms 5.5 AACrms
230 VACrms 650 Vp 3 to 32 VDC RP1A23D3 RP1A23D5 RP1A23D6
RP1B23D3 RP1B23D5 RP1B23D6
16 to 32 VAC - - RP1A23A6
400 VACrms 850 Vp 3 to 32 VDC RP1A40D3 RP1A40D5 RP1A40D6
4 to 32 VDC RP1B40D3 RP1B40D5 RP1B40D6
480 VACrms 1000 Vp 4 to 32 VDC RP1A48D3 RP1A48D5 RP1A48D6
RP1B48D3 RP1B48D5 RP1B48D6
Switching mode Rated operational voltage Rated operational current Control voltage
A: Zero switching 23: 230 VACrms 3: 3 AACrms D: 3 to 32 VDC*
B: Instant-On switching 40: 400 VACrms 5: 5 AACrms A: 16 to 32 VAC**
48: 480 VACrms 6: 5.5 AACrms
* 4 to 32 VDC for RP1A48..
4 to 32 VDC for RP1B40.. and RP1B48..
** Only available for 230V, 5.5 A
Type Selection
Selection Guide
RP 1 A 23 D 3
The RP1 is an SSR series for
socket- or PCB-mounting,
providing an ideal interface
between logic controls and
AC loads. The RP1 is
designed for resistive and
inductive loads up to
480VACrms. Two regulated
control voltage ranges cover
most standard input require-
ments in an economic pack-
age. These features allow a
direct substitution of existing
PCB mounted relays with
RP1. Internally this new series
enjoys an improved technical
design with the introduction of
stress-free flexible encapsula-
tion and automated assembly
of components. Opto-isola-
tion and load switching are
performed by individual com-
ponents, providing higher reli-
ability than monolithic
designs. Additionally RP1..6
is a special version with high
current surge capability that
reduces fusing requirements.
This relay can also drive high-
er AC53a loads up to 5 A.
The Solid State technology
used can withstand peak volt-
ages of 1000V, making the
RP1 series suitable to drive
AC loads such as valve
solenoids and small induction
motors.
Rated operational Non-rep. voltage Control voltage Rated operational current
voltage 3 AACrms 5 AACrms 5.5 AACrms
230 VACrms 650 Vp 5 to 34 VDC RP1A23D3M1 RP1A23D5M1 RP1A23D6M1*
RP1B23D3M1 RP1B23D5M1 RP1B23D6M1
16 to 32 VAC - - RP1A23A6M1
* For operational voltages ≥ 230 VACrms add suffix M2 to part no.
Selection Guide (mounted on DIN EN adaptor)