Technical Specifications

Specification Sheet
Carolina Beaded
™
Vinyl Siding
General Description: Reproduced from the classic weatherboard design, Carolina Beaded™ is a uniquely styled siding with
a wide clapboard face highlighted by a distinctive bead at the base of the panel. Carolina Beaded, available in 14 colors, is a
.044" thick brushed single course panel with a 6-1/2" exposure. It features a secure post-formed lock and its 3/4" panel
projection is compatible with all 3/4" pocket accessories.
Carolina Beaded siding is appropriate for use in new construction for single family homes, multi-housing projects and light
commercial developments. Carolina Beaded is also an ideal product for remodeling.
Colors: Carolina Beaded siding profiles are available in a wide selection of colors. All colors are Spectrophotometer
controlled and utilize exclusive PermaColor™ color science.
Colonial White
Granite Gray
Light Maple
Sandstone Beige
Snow
Cypress
Heritage Cream
Natural Clay
Savannah Wicker
Sterling Gray
Desert Tan
Herringbone
Oxford Blue
Silver Ash
STUDfinder™: The patented STUDfinder Installation System combines precisely engineered nail slot locations with
graphics. Nail slots are positioned 16" on center to allow for alignment with studs. STUDfinder graphics centered at each slot
provide a quick and easy guide to help locate studs.
Lock: Carolina Beaded siding panels feature a secure fitting post-formed lock popular with installers for its locking
assurance and trouble-free handling.
Accessories: CertainTeed manufactures a wide range of siding accessories which are compatible with Carolina Beaded
siding styles and colors. Accessory products include installation components, soffit, window and door trim, corner lineals,
corner systems and decorative moldings.
Composition: Carolina Beaded siding products are produced using CertaVin™ custom-formulated PVC resin. This resin is
produced exclusively by CertainTeed, allowing CertainTeed to maintain the high quality of its siding products.
Technical Data: Carolina Beaded siding is in compliance with ASTM specification for Rigid Polyvinyl Chloride (PVC)
Siding D 3679, and the requirements of section R703.11 of the International Residential Code, and section 1405.14 of the
International Building Code. Carolina Beaded siding meets or exceeds the properties noted in Table 1.
Table 1
ASTM E 84
Meets Class A flame spread requirements as tested according to ASTM E84.
ASTM D 1929
Self-ignition temperature 813°F
ASTM D 635
Material is self-extinguishing with no measurable extent of burn when tested in accordance with this specification.
NFPA 268
Radiant Heat Test - Ignition Resistance of Exterior Walls - Conclusion that CertainTeed met the conditions for
allowable use as specified in section 1406 of the International Building Code.
Important Fire Safety Information: When rigid vinyl siding is exposed to significant heat or flame, the vinyl will soften,
sag, melt or burn, and may thereby expose material underneath. Care must be exercised when selecting underlayment
materials because many underlayment materials are made from organic materials that are combustible. You should ascertain
the fire properties of underlayment materials prior to installation. All materials should be installed in accordance with local,
state and federal Building Code and fire regulations.
Wind Load Testing: Carolina Beaded has been tested to exceed the minimum wind load requirements per ASTM D3679
standard test method for resistance to negative wind load pressures of 31psf, which equates to more than 155 mph (V
ASD
) and
200 mph (V
ULT
), per VSI windspeed calculation guidelines, when installed with nails positioned 16" on center.