User manual

Adit 600 - Release 10.1.1 11

Quick Start

Chassis Connectors and Buttons

The following illustrations show all connectors on the back of the Adit 600.

Interface Connectors

The following are the Adit 600 interface connectors:

 T1-1/E1-1 and T1-2/E1-2 line connection ports each equipped with standard

RJ-48C 8-pin connector jack

 RS-232 craft port connector

 Tip and Ring Analog Interfaces equipped with standard 25-pair Telco

Connectors

 10Base-T Ethernet port to be connected to a remote management tool such as

Telnet or an SNMP-based Network Management System with an RJ-45 8-pin

connector jack

 External Alarm Connector

 Ground Lugs

Ground Terminals

Alarms

AC or DC Power Connector

-48V/Battery

Ethernet

T1-2/E1-2

T1/E1

RS-232 Craft Port25-Pair Telco Connectors

T1-1/E1-1

[10Base-T]

Connectors

Reset

(AC shown below)