User manual

Adit 600 - Release 10.1.1 27
Quick Start
Configuration
Basic Security Setup
Use the following commands to set up the security on the Adit 600. For further
information see the Adit 600 User Manual.
Command Description
set password length
{long|short}
Set user password length requirement.
add user {“user-name”}
[password {“password”}]
Add user and password as necessary.
set user {"user-name"} level
{1-3}
Specify the user’s security level.
set user {"user-name"}
password
Set/change password for the user as
necessary.