User manual

28 Adit 600 - Release 10.1.1
Quick Start
Configuration
DS1/T1 Setup
Use the following commands to set up a DS1. See the set (ds1) command for more
details.
Command Description
set {ds1-addr} up Activate the port of the DS1 (slot:port)
set {ds1-addr} id {"id-
string"}
Set the identification string.
set {ds1-addr} lbo {1-9} Set the line buildout value for the DS1.
set {ds1-addr} linecode
{ami|b8zs}
Set the linecode for the DS1.
set {ds1-addr} framing {d4|
esf|tr8afdl|tr8anofdl|tr8b}
Set the framing option for the DS1.
set {ds1-addr} loopdetect
{on|off}
Set the detection/reaction to CSU loopcodes.