User manual

34 Adit 600 - Release 10.1.1
Quick Start
Configuration
V.35 Port Setup
Use the following commands to set up a V.35 port. See the set (v35) command for
details.
Change the IP Address of the DS0 Management Channel
Use the following commands to change the IP over DS0 Management Channel for the
Adit 600.
Command Description
set {slot:port} cts
{cd|high|low|rts}
Set the Clear to Send operation mode.
set {slot:port} data
{invert|normal}
Set the data mode.
set {slot:port} clock
{source|external}
Set the clock mode.
set {slot:port} speed
{56K|64K}
Set the speed.
set {slot:port} txclkinv
{invert|normal}
Set the transmit clock inversion mode.
set {slot:port} rxclkinv
{invert|normal}
Set the receive clock inversion mode.
Command Description
set ipds0 down Set the DS0 management channel down
set ipds0 ip address
{ip-addr}
Set the DS0 management channel IP
address.
set ipds0 up Set the DS0 management channel up.