User manual

Adit 600 - Release 10.1.1 35
Quick Start
Configuration
Upgrade the Adit 600 Software
Use the following commands to determine the system software level, then upgrade the
software to the latest version.
Command Description
status equipment Determine the system software level. The
Slot A line (SW Vers) will display the
current software level
load tftp {ip-addr} {"file-
name"} (or load xmodem)
Load the new controller system software. See
the load tftp and load xmodem command for
more information.
Note:
A TFTP server must be running on
the host system. You can use any TFTP
server utility you wish. One example is
the program "TFTPD32" which can be
downloaded free-of-charge at
tftpd32.jounin.net/tftpd32.html
.