User manual

Adit 600 - Release 10.1.1 37
Quick Start
Configuration
Basic Router Setup
The following is the basic router setup. For more information and examples of various
router configurations, see the Adit 600 User Manual and the Router family User
Manuals.
NOTE: For MSR router setup information, see the following manuals:
-Adit 600 User Manual
-Adit 3000 Series and Multi-Service Router (MSR) Card GUI Reference Manual
-Adit 3000 Series and Multi-Service Router (MSR) Card CLI Reference Manual
Command Description
set {ds0-addr} type data
Confirm DS0 is set to type data.
ds0-addr = {slot:port:channel} of DS0
Example: set a:1:1-24 type data
connect {slot:port:trunk}
{slot:port:channel}
Cross-connect T1 to router card (in slot 6).
Example: connect a:1:1-24 6:1:1
set {router-addr} proxy
Disable/enable router proxy.
router-addr = {slot:port}| of router card.
Example: set 6:1 proxy disable.
set {slot:port} up
Set Router LAN as In-Service.
Example: set 6:1 up
telnet {router_card-addr}
Telnet to Router card.
router_card-addr = {slot} of router card
Example: telnet 6 (if earlier than 3.0 release
{slot:port} must be used)
Local and Remote Profile Setup
reset {slot}
For most router configuration changes to go
into effect, the router must be reset. Best
practice is to always reset the router after
making configuration changes.