User manual

Adit 600 - Release 10.1.1 51
Quick Start
Service Card LEDs
MSR Card
The following chart describes the MSR card’s LEDs.
LED State Description
CRD Off Loss of power
Green No current alarms
Red Alarm state active. See alarm log for cause.
Red Flashing Self-test or boot in process
Yellow Flashing Card is saving data to flash RAM, do not power
down.
VOIP Off No SIP proxy, or registration attempts for all lines
have succeeded, but no calls are active.
Green Active VoIP call(s)
Red Inability to reach the SIP proxy, or negative response
to register attempts from all lines.
Yellow Register attempts from some lines have succeeded,
but not for all lines.
ETH1 and
ETH2
Top LED
Off 10 Mbit/sec, down, or not connected
Green 100 Mbit/sec
ETH1 and
ETH2
Bottom LED
Off Link down
Green Link up
Flashing Green Traffic on link
Yellow Collision status