Operating instructions

CL-5
Record Configuration Information
*Not supported.
TOUCH PILOT™ DESCRIPTION NAVIGATOR™
ITEM
NAVIGATOR
SUBMODE
DEFAULT ENTRY
Cooling Setpoint 1 CSP.1 Set PointCOOL 44.0
Cooling Setpoint 2 CSP.2 Set PointCOOL 44.0
Cooling Ice Setpoint CSP.3 Set PointCOOL 44.0
Current No Reset Value (Cooling) CRV1 Set PointCOOL 0
Current Full Reset Value (Cooling) CRV2 Set PointCOOL 0
Delta T No Reset Value (Cooling) CRT1 Set PointCOOL 0
Delta T Full Reset Value (Cooling) CRT2 Set PointCOOL 0
OAT No Reset Value (Cooling) CRO1 Set PointCOOL 14.0
OAT Full Reset Value (Cooling) CRO2 Set PointCOOL 14.0
Space T No Reset Value CRS1 Set PointCOOL 14.0
Space T Full Reset Value CRS2 Set PointCOOL 14.0
Cooling Reset Deg. Value DGRC Set PointCOOL 0
Cool Changeover Setpoint CAUT Set PointCOOL 75
Cooling Ramp Loading CRMP Set PointCOOL 1.0
Switch Limit Setpoint 1 DLS1 Set PointMISC 100
Switch Limit Setpoint 2 DLS2 Set PointMISC 100
Switch Limit Setpoint 3 DLS3 Set PointMISC 100
Water Val Condensing Stp* W.SCT Set PointMISC 95.0
Equipment Start (I/O Button) OPER Operating ModesSLCT SWITCH CTRL
Setpoint Select SP.SE Operating ModesSLCT SET POINT OOC
Heal/Cool Select HC.SE Operating ModesSLCT COOLING