Specifications

54
APPENDIX A — LOCAL DISPLAY TABLES (cont)
Configuration Mode and Sub-Mode Directory (cont)
ITEM EXPANSION RANGE UNITS CCN POINT DEFAULT
RSET
RESET COOL TEMP
 CRST Cooling Reset Type 0 = No Reset
1 = 4 to 20 mA Input
2 = Outdoor Air
Temperature
3 = Return Fluid
4 = Space Tempera-
ture
X CRST_TYP 0 = No Reset
 MA.DG 4-20 - Degrees Reset –30 to 30F
(–16.6 to 16.6C)
XX.XΔF MA_DEG 10.0F( 5.5C)
 RM.NO Remote - No Reset Temp 0 to 125°F
(–17.8 to 51.7°C)
XXX.X °F REM_NO 10.0F (–23.3C)
 RM.F Remote - Full Reset Temp 0 to 125°F
(–17.8 to 51.7°C)
XXX.X °F REM_FULL 0.0F (–17.8C)
 RM.DG Remote - Degrees Reset –30 to 30F
(–16.6 to 16.6C)
XX.X ΔF
REM_DEG 0.0F (0.0C)
 RT.NO Return - No Reset Temp 0 to 30F
(0 to 16.6C)
XXX.XΔF RTN_NO 10F (5.5C)
 RT.F Return - Full Reset Temp 0 to 10F
(0 to 5.5C)
XXX.XΔF RTN_FULL 0.0F (0.0C)
 RT.DG Return - Degrees Reset –30 to 30F
(–16.6 to 16.6C)
XX.XΔF
RTN_DEG 0.0F (0.0C)
 DMDC Demand Limit Select 0 = None
1 = Switch
(Requires EMM)
2 = 4 to 20 mA Input
(Requires EMM)
3 = CCN Loadshed
X DMD_CTRL 0 = None
 DM20 Demand Limit at 20 mA 0 to 100 XXX% DMT20MA 100
 SHNM Loadshed Group Number 0 to 99 XXX SHED_NUM 0
 SHDL Loadshed Demand Delta 0 to 60 XXX% SHED_DEL 0
 SHTM Maximum Loadshed Time 0 to 120 XXX SHED_TIM 60
 DLS1 Demand Limit Switch 1 0 to 100 XXX% DLSWSP1 80
 DLS2 Demand Limit Switch 2 0 to 100 XXX% DLSWSP2 50
 LLEN Lead/Lag Chiller Enable DSBL/ENBL LL_ENA DSBL
 MSSL Master/Slave Select SLVE/MAST MS_SEL MAST
 SLVA Slave Address 0 to 239 XXX SLV_ADDR 0
 LLBL Lead/Lag Balance Select 0 = Master Leads
1 = Slave Leads
2 = Automatic
X LL_BAL 0 = Master Leads
 LLBD Lead/Lag Balance Delta 40 to 400 hours XXX LL_BAL_D 168
 LLDY Lag Start Delay 0 to 30 minutes XXX LL_DELAY 5 minutes
 PARA Parallel Configuration NO/YES PARALLEL YES
SLCT SETPOINT AND RAMP LOAD
 CLSP Cooling Set Point Select 0 = Single
1 = Dual Switch
2 = Dual CCN
Occupied
3 = 4 to 20 mA Input
X CLSP_TYP 0 = Single
 RL.S Ramp Load Select DSBL/ENBL RAMP_EBL ENBL
 CRMP Cooling Ramp Loading 0.2 to 2 X.X CRAMP 1.0
 SCHD Schedule Number 0 to 99 XX SCHEDNUM 0
 Z.GN Deadband Multiplier 1 to 4 X.X Z_GAIN 1.0
SERV
SERVICE CONFIGURATION
 EN.A1
Enable Compressor A1 DSBL/ENBL
ENABLEA1
 EN.A2 Enable Compressor A2
DSBL/ENBL
ENABLEA2
 EN.A3 Enable Compressor A3 DSBL/ENBL ENABLEA3
 REV.R Reverse Rotation Enable DSBL/ENBL REVR_ENA ENBL
BCST BROADCAST CONFIGURATION
 T.D.BC CCN Time/Date Broadcast OFF/ON CCNBC OFF
 OAT.B CCN OAT Broadcast OFF/ON OATBC OFF
 G.S.BC Global Schedule Broadcst OFF/ON GSBC OFF
 BC.AK CCN Broadcast Ack'er OFF/ON CCNBCACK OFF