Owner Manual

www.CasablancaFanCo.com
1.888.227.2178
16
M8515-01 • 11/15/18 • © 2018 Casablanca Fan Company
Wall Control For Dual Switches
Ensure the power is OFF at the
outlet box and wall switch location
before proceeding with installation.
Turn Power
OFF
3
Turn off the power
1
Installing the battery
To access the battery compartment,
slide the battery door up.
Replace the used battery with two
AAA batteries when needed.
1. Turn on power for the fan.
2. Push both existing wall switches to
the on position.
3. Press the Fan and Light button on the
Casablanca Wall Control.
4. Your fan’s light and fan should be on.
5. Push each of your existing wall
switches into the off position one at
a time to determine which switch
controls the Light.
6. The Light switch will not be replaced
when installing the Casablanca Wall
Control. You may nd it helpful to
mark the Light switch with a pencil or
some other non-permanent mark.
Battery
Door
Verify which switch controls the fan light.
ON
Turn Power
2
To install the Casablanca Wall Control into a dual switch lo-
cation, you will need a wall plate with both a standard switch
and rocker switch cut-out (sold separately).
IMPORTANT
If you are unfamiliar or
uncomfortable with wiring, please
contact a qualied electrician.
(Sold
Separately)