Owner Manual

www.CasablancaFanCo.com
1.888.227.2178
17
M8515-01 • 11/15/18 • © 2018 Casablanca Fan Company
Wall Control For Dual Switches
7
Install the Wall Plate
Install the wall plate that ts
your setup (sold separately).
The existing light switch still
controls the light on/off.
Turn on the power
Installation complete
Reference the included remote function
card for information on how to use your wall
control!
ON
Turn Power
IMPORTANT
9
8
10
4
5
Remove the existing wall plate
Remove the Casablanca Wall
Control frame.
Remove the existing wall
plate. Save the screws.
You will need them for the
existing, marked light switch.
Remove the frame from the
Casablanca Wall Control. You
will not need it for the dual
switch installation process.
6
Wiring the Casablanca Wall
Control
1. Connect the grounding wire from
the wall control to the ground
control from the switch box
using the provided wire nuts.
2. Connect the “LIVE IN” from the
switch box to the “~VAC” from
the wall control using the
provided wire nuts.
3. Connect the “LIVE OUT” from the
switch box to the “FAN” out from
the wall control using the provided
wire nuts.
4. Push all wires into the switch box.
1. Use the screws you saved
to reinstall into the light
switch.
2. Use the screws included