Owner Manual

www.CasablancaFanCo.com
1.888.227.2178
9
Turn the light kit clockwise until the
housing assembly screws are rmly
situated in the narrow end of the keyhole
slots. Install the remaining screw into the
housing. Tighten all three screws securely.
Align the keyhole slots in the light kit
housing with the housing assembly
screws. Make sure all the wires from the
fan and the light kit are snug inside the
center of the light kit, not pinched in
between the upper switch housing and
the light kit or hanging out of the sides.
Partially install two of the switch housing
screws found in the bag. Connect
the plugs from the upper and lower
switch housings. Make sure to line up the
colored markings on the connectors.
Switch Housing & Light Kit (continued)
M8541-01 • 01/27/16 • © 2016 Casablanca Fan Company