Owner Manual

www.CasablancaFanCo.com

1.888.227.2178

Switch Housing & Light Kit (continued)

Make sure the light kit is securely attached to the upper switch

housing. Failure to properly secure all 3 assembly screws could

result in the switch housing xture falling.

Raise the light kit to the fan with the

sticker on the light kit aligned with the

sticker on the upper switch housing.Wrap

the keyhole slots around the screws and

twist the lower light kit clockwise.

Locate the red sticker on the upper

switch housing. Screw two switch

housing screws from the hardware

bag halfway into the other two screw

holes in the upper switch housing.

Sticker

Connect the white wire from the fan to

the white wire from the light kit, then

connect the black wire from the fan to

the black wire from the light kit.

Sticker