Owner`s manual

15
Ba r o l o
®
Please refer to this troubleshooting guide before requesting service or contacting your dealer for assistance.
TROUBLESHOOTING TIPS
PROBLEM POSSIBLE REMEDIES
        
connections. Make sure the power is turned off during this inspection.
  
  
  
not functioning only. Check that the jumper switches match in both the receiver and the
transmitter.
  
       
balanced.
  
bracket is attached tightly to the ceiling outlet box and the downrod assembly is secured
firmly.
  
securely tightened.
             
lightbulb(s).
  
canopy and switch housing are not touching the metal parts and that they have not fallen
off the wire splices. Tighten as necessary.
  
bladeholder screws.
  
  
  
Lights flash or blink, fan may rotate or make audible tones during operation of
  

  
Light button operates the fan. striped wire connections.
  
 
or circuit board assembly.

®

®
  
  
  
  
This device complies with RSS-210 of Industry Canada. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including
interference that may cause undesired operation of the device.
1. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
2. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful inter-
ference to radio communications. However there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna,
Increase the separation between the equipment and receiver, Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced
radio/TV technician for help. Note: Any changes or modications to the transmitter or receiver not expressly approved by Casablanca Fan Company may void one’s authority to operate this remote control.