Owner`s manual

5
Ba r o l o
®
LAG SCREW INSTALLATION
CANOPY INSTALLATION

the fan weighs 36 lbs. or more or if the existing ceiling fixture
outlet box needs to be modified for a ceiling fan application
(for example, if the house is not new construction and you
   
that the ceiling box be of sufficient capacity to support the
weight of the fan and light fixture under any conditions. If
in doubt whether you need to install the lag screw, consult
a qualified electrician.

(Pack A) through the center hole of the crossbar mounting
bracket and screw into the guidehole. Tighten until the

be secured to the ceiling firmly.
Step 3. Attach the canopy to the crossbar mounting bracket
with three of the 8-32 x 2
1
/
2
" long canopy screws (Screw
Pack B) and lock washers provided with your Casablanca
fan. Tighten using the provided screwdriver until snug
against the ceiling.
NOTE: On sloped ceilings, align the canopy opening with
the top or peak of the room.
CANOPY HARDWARE (not to scale)
Canopy
Canopy Hatch
Feed outlet box
wires through
canopy opening
Canopy
Lock Washer
Canopy Screw
Screw Pack B:
Canopy Screws and
Lock Washers (5)