Installation Condition 1. Check the Accessories List to verify that all parts are complete in this package. 2. Do not disassemble the main body by yourself, 3. Connect inlet pipes to supply valves. 4. Make sure inlet pipes and supply valves have been installed and cleaned, with no impurities in the pipeline. 5. After installation, check all joints for leakages. 8. Do not leave the rain shower system exposed to a severely corrosive environment.
Model 51684 Bathtub Faucet Slanders Part List NG Bart Name NCH Part Nam Masculinity 1 Face! Spout 4 | Hand Pedestal Gasket 2 Brass Concepcion 10 Hand Pedestal Mut 1 @ 3 Sauce! Spout Gasket! 1% Shower Moe 1 4 Hat 3 Hat and Cold Hoses 2 5 Faucet Body 13 Borrower Connector Hose 4 8 Faust Body Nut 14 Pout Connector Hose i 7 Hand-shows 1% GWE change to NFT12 2 B Hand Pedestal 16 Instruction Marla
Bathing Faves Installation Step 1 1. Following the dimension of picture | ars make holes in the edge of bathtub Step 2 + Hand-shower we Sheerer Pedestal 2. Taking off the fed nut oF spud, the fed md of ware diversion body and fixed mn of shower pedestal successively.
ful Faves! Installation Step 3 g an Selim meta; se li 3 Fallow lg the issues 3 to fis te spout, Bre water diversion buy and Bie shower pedestal in the bathtub. Then tighten mounting nut utd snug Step 4 aft Fight 4. Sonnecting the cold ard hat int MIPS with angle valve Purr on the water supply.
Model 51682 Bathtub Faucet Slanders Part List NG Bart Name NCH Part Nam Masculinity 1 Face! Spout 4 | Hand Pedestal Gasket 2 Brass Concepcion 10 Hand Pedestal Mut 1 @ 3 Sauce! Spout Gasket! 1% Shower Moe 1 4 Hat 3 Hat and Cold Hoses 2 5 Faucet Body 13 Borrower Connector Hose 4 8 Faust Body Nut 14 Pout Connector Hose i 7 Hand-shows 1% GWE change to NFT12 2 B Hand Pedestal 16 Instruction Marla
ful Faves! Installation Step 1 1. Following the dimension of picture | ars make holes in the edge of bathtub Step 2 + Hand-shower we Sheerer Pedestal 2. Taking off the fed nut oF spud, the fed md of ware diversion body and fixed mn of shower pedestal successively.
ful Faves! Installation Step 3 g an Selim meta; se ides 3 Fallow lg the issues 3 to fis te spout, Bre water diversion buy and Bie shower pedestal in the bathtub. Then tighten mounting nut utd snug Step 4 aft Fight 4. Sonnecting the cold ard hat int MIPS with angle valve Purr on the water supply.
Care and Maintenance Do's 1. In order to keep the mixer surface bright, please clan the mixer regularly. 2. Rinse faucet with clean water and wipe it with soft cotton cloth. 3. Use one of the following cleaners to remove dirt on the surface: a. Mild liquid cleaner. b. Colorless glass cleaner and powder cleaner which does not cause abrasion and can be dissolved completely. ©. Polish liquid which does not cause abrasion. Don'ts a.