Installation Guide

Fig.1
Long Screw
Keyhole Slot
ASSEMBLY AND INSTALLATION
INSTRUCTIONS
WARNING: BE SURE TO SHUT OFF POWER AT THE MAIN FUSE OR CIRCUIT
BREAKER BOX BEFORE INSTALLING OR SERVICING THIS FIXTURE.
NOTE: 1. Before installing, consult local electrical codes for wiring and grounding requirements.
2. READ AND SAVE THESE INSTRUCTIONS.
C0033
Pan
Socket
Coupling
Washer (F)
Hex Nut (E)
Nipple (G)
Glass Shade (L)
House Grounding Wire
Outlet Box
Wire Nut (M)
Mounting Strap (A)
Green Grounding Screw (C)
Mounting Screw (B)
Long Screw (D)
Fixture Grounding Wire
1. Attach the two long screws to the mounting strap, and screw in 2 to 3 turns.
2. Attach the mounting strap to the outlet box using two mounting screws.
3. Pull out the outlet wires and the house grounding wire from the outlet box. Make wire connections
using the wire nuts:
---The black (hot) wire from the fixture to the black (hot) wire from the power source.
---The white (neutral) wire from the fixture to the white (neutral) wire from the power source.
---Attach the fixture grounding wire to the mounting strap with the green grounding screw. Then
connect it to the house grounding wire with the wire nut.
Carefully put the wires back into the outlet box.
4. Attach the pan to the mounting strap by inserting two long screw heads into the key holes, and
rotate the pan until it locks in place. Then secure the screws tightly. (See Fig.1)
5. Screw the nipple into the coupling, then secure it with a washer and hex nut.
6. Install bulbs (not included). See relamping label at socket area or packaging for maximum allowed
wattage.
7. Slip the glass shade up through nipple and secure it with a rubber pad, metal pad and hex nut.
Slide the cover up to glass shade, and secure it with the finial.
8. Turn on the power at the main fuse or circuit breaker box.
Bulb Type A Max. 60W
(not included)
Hex Nut (E)
Finial (K)
Glass Shade (L) (1 PCS)
Hex Nut (E)
Washer (F)
Nipple(G)
Parts:
Parts Number (4625MM)
Mounting Screw (B)
Green Grounding
Screw (C)
Wire Nut (M)
Mounting Strap (A)
Long Screw (D)
Rubber Pad (H)
Metal Pad (I)
Cover (J)
Finial (K)
Parts Number (935913MM)
Rubber Pad (H)
Metal Pad (I)
Cover (J)
121221

Summary of content (2 pages)