Installation Guide

1. Attach the nipple(-a) to the mounting strap, then secure it
with a washer and hex nut.
2. Attach the mounting strap to the outlet box by using two
mounting screws.
3. Adjust the arms of the fixture according to the drawing of
the package.
Important:
a. The arms of each tier should be positioned with
equal distances between them.
b. The arms should be fixed securely.
4. Thread the fixture wire and the fixture grounding wire through
the ball nut and tube, then secure them with the loop.
5. Choose the length of the chain you need, then weave the fixture
wire and the grounding wire through the chain. Then connect
one end of the chain with the loop by using the loop lock.
6. Secure the top loop onto the nipple(-a).
7. Thread the fixture wire and fixture grounding wire through
the collar, canopy, top loop, nipple(-a) and mounting strap.
8. Connect the link on the other end of the chain with the top
loop by using the loop lock.
9. Pull out the outlet wires and the house grounding wire from
the outlet box. Make wire connections using the wire nuts:
---The smooth wire (marked) from the fixture to the
black wire from the power source.
---The ridged wire (unmarked) from the fixture
to the white wire from the power source.
---Attach the fixture grounding wire to the
mounting strap with the green grounding
screw. Then connect it to the house grounding
wire with a wire nut.
Carefully tuck the wires back into the outlet box.
10. Attach the canopy to the mounting strap by inserting
the top loop, then secure it with the collar.
11. Screw the nipple(-c) into the coupling and secure it with
a hex nut. Then attach the cover upward to the fixture by
inserting the nipple(-c) and secure it with the finial.
12. Attach the glass shades onto the glass holders, then secure
them with the socket rings.
Note: All glass shades of each tier should be on the
same horizontal level.
13. Install bulbs (not included). See relamping label at socket
area or packaging for maximum allowed wattage.
14. Turn on the power at the main fuse or circuit breaker box.
Fixture Wire
Chain
Mounting Screw
Nipple(-a)
Fixture Grounding Wire
Collar
Top Loop
Canopy
Mounting Strap
Green Grounding Screw
Hex Nut
Wire Nut
Washer
Outlet Box
House Grounding Wire
Socket Holder
Glass Shade
Socket Ring
Fixture
Loop Lock
Loop Lock
Loop
Tube
Ball Nut
Arm
060120
Nipple(-b)
Coupling
Hex Nut
Nipple(-c)
Cover
Finial
ASSEMBLY AND INSTALLATION
INSTRUCTIONS
WARNING: BE SURE TO SHUT OFF POWER AT THE MAIN FUSE OR CIRCUIT
BREAKER BOX BEFORE INSTALLING OR SERVICING THIS FIXTURE.
NOTE: Before installing, consult local electrical codes for wiring and grounding requirements.
BE-CHU008/009