Installation Guide

Install bulbs (included). See relamping
label at socket area or packaging for
maximum allowed wattage.
The slide switch sets the direction of fan rotation. Select the direction
of fan rotation you need by sliding the switch.
Push the slide switch bottom for " Forward" and top for "Reverse".
CAUTION: If you install a Remote Control or a Wall Control for this
fan, make sure to use the pull chains to select the "high" position
for the fan speed and the "on" position for the fan light.
Turn ON the electric power at the
main fuse or circuit breaker box.
Make wire connections using wire nuts:
--- The blue wire from the switch box to
the black wire from fan light.
--- The white wire from the switch box
to the white wire from fan light.
Carefully put the wires into the switch box.
Attach the glass shade onto the fan
light and secure it with set screws.
Secure the fan light onto the switch
box using the switch box screws.
Fig.15
Fan Light
Wire Nut
Switch Box Screw
Fig.16
E26 medium base
spiral fluorescent
Bulb (Max.19W)
(included)
Fig.17
Fig.18
Fan Speed Pull Chain
Fan Light Switch
Pull Chain
Slide Switch
Reverse
Forward
Fig.19
Fig.20
Fan Light Installation:
Page 7 / 9
F A N C O
141016
Set Screw
Glass Shade