Installation Guide

ManualsBrandsCascadia ManualsChandeliersCalais 9-Light Satin Nickel Transitional Tinted Glass Tiered Chandelier

ASSEMBLY AND INSTALLATION

INSTRUCTIONS

WARNING: BE SURE TO SHUT OFF POWER AT THE MAIN FUSE OR CIRCUIT

BREAKER BOX BEFORE INSTALLING OR SERVICING THIS FIXTURE.

NOTE: 1.

Before installing, consult local electrical codes for wiring and grounding requirements.

2. READ AND SAVE THESE INSTRUCTIONS.

H0100 / H0103

Loop

Parts:

Bulb Type A Max.100W

(not included)

Parts Number (4930MM For H0100)

Parts Number (4922MM For H0103)

Mounting Strap (A)

Mounting Screw (B)

Green Grounding

Screw (C)

Wire Nut (D)

Canopy (I)

Loop Lock (K)

Chain (L)

131205

Main Fixture

Socket

Outlet Box

House Grounding Wire

Wire Nut (D)

Fixture Wire

Fixture Grounding Wire

Mounting Strap (A)

Green Grounding Screw (C)

Mounting Screw (B)

Nipple(G)

Canopy (I)

Top Loop (H)

Hex Nut (E)

Washer (F)

Collar (J)

Loop Lock (K)

Chain (L)

Hex Nut (E)

Washer (F)

Nipple(G)

Top Loop (H)

Collar (J)

1. Attach nipple to the mounting strap, then secure it with

a washer and hex nut.

2. Attach the mounting strap to the outlet box by using two

mounting screws.

3. Secure the loop to the stem of the main fixture.

4. Adjust the arms of the fixture according to the drawing

of the package.

Important:

a. The arms of each tier (bottom, middle) should

be positioned with equal distances between

them.

b. The arms should be fixed securely.

5. Choose the length of the chain you need, then weave

the fixture wire and the fixture grounding wire through

the chain. Then connect one end of the chain with the

loop by using the loop lock.

6. Secure the top loop to nipple.

7. Thread the fixture wire and fixture grounding wire through the collar, canopy, top loop, nipple and

mounting strap.

8. Connect the other end of the chain with the top loop by using the loop lock.

Arm

Glass Bracket

Glass Shade (N)

Socket Ring

Socket Fixer (M)

Parts Number (9545FO)

Glass Shade (N) (X9)

Parts Number (4924XX)

Socket Fixer (M) (X1)

Summary of content (2 pages)

PAGE 1
ASSEMBLY AND INSTALLATION INSTRUCTIONS H0100 / H0103 WARNING: BE SURE TO SHUT OFF POWER AT THE MAIN FUSE OR CIRCUIT BREAKER BOX BEFORE INSTALLING OR SERVICING THIS FIXTURE. NOTE: 1. Before installing, consult local electrical codes for wiring and grounding requirements. 2. READ AND SAVE THESE INSTRUCTIONS.
PAGE 2
9. Pull out the outlet wires and the house grounding wire from the outlet box. Make wire connections by using the wire nuts: ---The smooth wire (marked) from the fixture to the black wire from the power source. ---The ridged wire (unmarked) from the fixture to the white wire from the power source. ---Attach the fixture grounding wire to the mounting strap with the green grounding screw. Then connect it to the house grounding wire with a wire nut. Carefully put the wires back into the outlet box. 10.