Installation Guide

ASSEMBLY AND INSTALLATION
INSTRUCTIONS
NOTES: 1. Before installing, consult local electrical codes for wiring and grounding requirements.
2. READ AND SAVE THESE INSTRUCTIONS.
H0123 / H0124
WARNING:
TO AVOID RISK OF ELECTRICAL SHOCK, BE SURE TO SHUT OFF
POWER WHILE INSTALLING OR SERVICING THIS FIXTURE.
Turn off the power at fuse or circuit box.
140730
Page 1
1. Carefully remove the fixture from the carton and check that all
parts are included.
2. Thread the center stem onto the coupling on the top center of
the fixture
3. Rod Connections:
a. Thread the fixture wire from the fixture through
the 3" rod, then secure 3" rod onto center stem
using threaded pipe.
b. Thread the fixture wire through the middle rod,
then secure middle rod onto 3" rod using
threaded pipe.
c. Thread the fixture wire through the upper rod,
then secure upper rod onto middle rod using
threaded pipe.
"NOTE: Length
adjustable from
28-1/4" to 82-1/4".
Use fewer rods if
shorter length is
desired.
4. Thread the fixture wire
through the coupling
kit, collar, canopy, then
secure the rod assembly
to the coupling kit.
Collar (I)
Canopy (G)
Outlet Box
House Grounding Wire
Wire Nut (E)
Threaded Pipe (F)
Mounting Strap (A)
Green Grounding Screw (C)
Mounting Screw (B)
Upper Rod
Middle Rod
3" Rod
Coupling
Threaded Pipe
Fixture Wire
Coupling Kit (H)
Fixture Grounding Wire
Hex Nut (D)
Mounting Strap (A)
Mounting Screw (B)
Green Grounding
Screw (C)
Hex Nut (D)
Wire Nut (E)
Canopy (G)
Coupling Kit (H)
Collar (I)
Hex Nut (D)
Hardware Package (included):
Assembly Instructions:
Washer (J)
Threaded Pipe (F)
Spacer (L)
Glass bracket
Socket Ring
Bulb Type A Max.100W
(not included)
Socket
Glass Shade (K)
Center Stem
Washer (J)