Installation Guide

ASSEMBLY AND INSTALLATION
INSTRUCTIONS
NOTES: 1. Before installing, consult local electrical codes for wiring and grounding requirements.
2. READ AND SAVE THESE INSTRUCTIONS.
H0165
WARNING:
TO AVOID RISK OF ELECTRICAL SHOCK, BE SURE TO SHUT OFF
POWER BEFORE INSTALLING OR SERVICING THIS FIXTURE.
151007
Hardware Package (included):
Outlet Box
House Grounding Wire
Wire Nut(D)
Fixture Wire
Fixture Grounding Wire
Mounting Strap(A)
Green Grounding Screw(C)
Mounting Screw(B)
Threaded Pipe(G)
Canopy(I)
Top Loop(H)
Hex Nut(E)
Washer(F)
Collar(J)
Loop Lock(K)
Loop Lock(K)
Chain(L)
Glass Shade
Loop
Mounting Strap (A)
Mounting Screw (B)
Green Grounding
Screw (C)
Wire Nut (D)
Canopy (I)
Loop Lock (K)
Chain (L)
Hex Nut (E)
Washer (F)
Threaded Pipe(G)
Top Loop (H)
Collar (J)
Turn off the power at fuse or circuit box
Installation Steps
1. Attach threaded pipe to the mounting strap, and then secure it
with a washer and a hex nut.
2. Attach the mounting strap to the outlet box by using two mounting
screws.
3. Secure the top loop to the threaded pipe.
4. Secure the downrod onto the stem of the fixture.
5. Secure the loop onto the stem of the downrod.
6. Connect the chain:
- Determine needed length of chain to achieve desired fixture height.
(To remove excess chain section, use pliers to bend link open.)
- Weave the fixture wires through the chain, collar and canopy.
7. Connect one end of the chain to the loop using a loop
lock.
8. Connect another end of the chain to the top loop
using another loop lock.
9. Thread the fixture wire and fixture
grounding wire through the top loop,
threaded pipe and mounting strap.
Socket
Stem
Stem
Fixture
Glass Holder
Socket Ring
Downrod
Bulb Type A Max.60W
(not included)