Installation Guide

5.
Secure the loop onto the stem of the middle fixture, thread
fixture wires through threaded end of loop first.
6. Connect the chain:
- Determine length of chain needed to achieve desired fixture height.
(To remove excess chain section, use pliers to bend link open.)
- Weave the fixture wires and fixture grounding wire through the chain,
collar and canopy.
ASSEMBLY AND INSTALLATION
INSTRUCTIONS
NOTES: 1. Before installing, consult local electrical codes for wiring and grounding requirements.
2. READ AND SAVE THESE INSTRUCTIONS.
H0187
Main Fixture
Middle Fixture
Glass Shade
Socket Ring
Upper Arm
Middle Arm
Inner Arm
Glass Holder
WARNING:
TO AVOID RISK OF ELECTRICAL SHOCK, BE SURE TO SHUT OFF
POWER WHILE INSTALLING OR SERVICING THIS FIXTURE.
Hardware Package (included):
171030
Socket
Turn off the power at fuse or circuit box.
Installation Steps
Loop Lock(K)
Loop Lock(K)
Canopy(G)
Collar(I)
Chain(L)
Loop
Bulb type A Max.
60W(not included)
Mounting Strap (A)
Mounting Screw (B)
Green Grounding
Screw (C)
Hex Nut (D)
Wire Nut (E)
Canopy (G)
Top Loop (H)
Collar (I)
Washer (J)
Loop Lock (K)
Chain (L)
1. Attach the threaded pipe to the mounting strap, then secure it
with a washer and hex nut.
2. Attach the mounting strap to the outlet box by using two
mounting screws.
Outlet Box
House Grounding Wire
Wire Nut (E)
Long Screw (F)
Mounting Strap (A)
Hex Nut (D)
Green Grounding Screw (C)
Mounting Screw (B)
Long Screw (F)
Nipple
3. Attach threaded pipe to coupling,secure middtle fixture on
the nipple and locking the spare parts.
4.
The loop lock tightening in stem.
7. Connect one end of the chain to the loop using a loop lock.
8. Connect the other end of the chain to top loop by using the other loop lock.