User manual - PX760_860_AP260_460_MIDI_E

19 Patch Parameters
The main function of patch parameters is to configure the settings of the sound source of a device.
19.1 Master Tune Parameters
These parameters configure the Master Tuning Settings.
Parameter ID R/W Block Size Array Min-Def-Max Description
Master Fine Tune 0001 R/W 000000 10 01 0000-0200-03FF -100 - 0 -
+99.8(cent)(1unit=100/512cents)
Master Coarse Tune 0002 R/W 7 01 00-40-7F -24 - 0 - +24(semitone)
Stretch Tune Enable 0003 R/W 1 01 00-01-01 0...Disable
1...Enable
19.2 Master Mixer Parameters
These parameters configure the Master settings of the mixer.
Parameter ID R/W Block Size Array Min-Def-Max Description
Master Volume 0012 R/W 000000 7 01 00-7F-7F 0-127
Master Pan 0013 R/W 7 01 00-40-7F -64 - 0 - +63
Chorus To Reverb 001D R/W 7 01 00-00-7F 0-127
Chorus Return 001E R/W 7 01 00-40-7F 0-127
Reverb Return 0025 R/W 7 01 00-40-7F 0-127
Dsp Cancel 0028 R/W 1 01 00-00-01 0...Normal
1...Cancel
19.3 System Chorus Parameters
Parameter ID R/W Block Size Array Min-Def-Max Description
Cancel 0050 R/W 000000 1 01 00-00-01 0...Normal
1...Cancel
Type 0051 R/W 7 01 00-02-0F 1-16 (Note1)
Rate 0052 R/W 7 01 00-03-7F 0-127
Depth 0053 R/W 7 01 00-13-7F 0-127
Feedback 0054 R/W 7 01 00-00-7F 0-127
Tone 0055 R/W 7 01 00-7F-7F 0-127
Note1 : Selects the System Chorus preset type. Receipt of GM/GS Reset selects Chorus3. The value of this type is also
linked to System Chorus parameters, and to the Chorus Send to Reverb and System Chorus Return Level parameters, and its
setting causes these parameters to change to prescribed values. For details about the preset type list, see 25.9 Chorus Type
Setting Value Table .
19.4 System Reverb Parameters
Parameter ID R/W Block Size Array Min-Def-Max Description
Cancel 0080 R/W 000000 1 01 00-00-01 0...Normal
1...Cancel
Type 0081 R/W 7 01 00-13-19 1-26 (Note1)
Feedback 0082 R/W 7 01 00-40-7F 0-127
Er Level 0083 R/W 7 01 00-40-7F 0-127
Damp 0084 R/W 7 01 00-40-7F 0-127
Tone 0085 R/W 7 01 00-7F-7F 0-127
36