User Manual

ManualsBrandsCasio ManualsCoffee MakersAP-470

2/4USER’S GUIDE

■ To play back a recorded performance

Press the MIDI REC button once or twice (Until the

MIDI REC lamp is lit.)

This enters playback standby.

Hold down the FUNCTION button and press the

a button once or twice until the lamp of the track

to be played back is lit.

• To play back both tracks, make sure that both the L

and R lamps are lit.

Press the a button.

This starts playback.

• To stop playback, press the a button.

■ To play back from one track as you record to

another track

Press the MIDI REC button once or twice (Until the

MIDI REC lamp is lit.)

This enters playback standby.

Hold down the FUNCTION button and press the

a button once or twice until the lamp of the track

to be played back is lit.

Press the MIDI REC button so the MIDI REC lamp is

flashing.

This enters record standby.

Hold down the FUNCTION button and press the

a button once or twice until the lamp of the track

to be recorded is flashing.

Press the a button or start playing.

This starts recording and playback.

• If you want to re-record from the beginning, hold

down the MIDI REC button until the Digital Piano

beeps.

• To stop playback and recording, press the a

button.

■ To delete a recorded performance

IMPORTANT!

• A track delete operation cannot be undone. Deleted

data is unrecoverable.

Press the MIDI REC button once or twice so the

MIDI REC lamp is flashing.

Hold down the FUNCTION button and press the

a button once or twice until the lamp of the track

to be deleted is flashing.

Hold down MIDI REC until the MIDI REC lamp is lit.

This enters delete standby.

Hold down the FUNCTION button and press the

a button.

This deletes the contents of the selected track.

• To exit the above operation at any point, press the

MIDI REC button once or twice so the MIDI REC

lamp is unlit.

Hall simulation makes it possible to simulate the rich clarity,

unconstrained brilliance, and other distinctive acoustic

characteristics of world-famous concert halls.

Hold down the FUNCTION button and press Hall

Simulator key of the simulation to be applied.

Applying Hall Simulation

Name Description

DUTCH CHURCH Amsterdam church with acoustics

that are suitable for music

STANDARD HALL Standard concert hall

BERLIN HALL Berlin arena type classic concert

hall

FRENCH

CATHEDRAL

Large Gothic cathedral in Paris

You can record your performances as audio files to a USB

flash drive and play them back when you want.

Anything played on the Digital Piano is recorded to the USB

flash drive as audio data (WAV file*).

* Linear PCM, 16bit, 44.1 kHz, Stereo

Front

Bottom

■ Recording Capacity

• 99 files (TAKE01.WAV to TAKE99.WAV)

• Approximately 25 minutes maximum recording per file.

■ Recorded Data

• Everything played on the Digital Piano

• Individual part recording is not supported.

■ Recording Data Storage

Each new recording of audio data to a USB flash drive is

automatically assigned a new file name, so existing data is

not overwritten.

■ To record keyboard play

Insert the USB flash drive into the USB flash drive

port.

• When you plug in a USB flash drive, the Digital

Piano performs a mounting sequence to prepare for

data exchange with the USB flash drive. The L and

R lamps flash and Digital Piano operations are

temporarily disabled during the mounting sequence.

• It may take up to 10 or 20 seconds or even longer

for USB flash drive mounting to finish. Do not

perform any operation on the Digital Piano mounting

is in progress.

• A USB flash drive needs to be mounted each time it

is connected to the Digital Piano.

Press the AUDIO REC button once or twice so the

AUDIO REC lamp is flashing.

This enters record standby.

To start recording, press the a button or start

playing.

This starts recording to the USB flash drive.

• Recording can also be started by pressing a pedal

or performing another operation.

• If, while recording is in progress, you want to re-

record from the beginning, hold down the AUDIO

REC button until the Digital Piano beeps. This

discards the current recording data and enters

recording standby.

• To stop recording, press the a button or AUDIO

REC button.

To record more, perform the above procedure from

step 2.

IMPORTANT!

• Do not remove the USB flash drive from the USB

flash drive port while the AUDIO REC lamp is

flashing. Doing so interrupts recording and may

corrupt data.

• A yellow flashing METRONOME button lamp

indicates an error. For more information, see “Error

Indicators” on this page of these instructions.

Using the Audio Recorder

USB flash drive port

USB Port

■ To play back data recorded on a USB flash

drive

Press the AUDIO REC button once or twice so the

AUDIO REC lamp is lit.

This enters playback standby.

Select the song you want to play back.

If you want to play back the last file you recorded, jump

directly to step 3.

● To select the previous song

Hold down the FUNCTION button and press the Select

Music Library Song minus (–) key.

Each press scrolls back one song.

● To scroll in file number sequence

Hold down the FUNCTION button and press the Select

Music Library Song plus (+) key.

Each press scrolls forward one song.

● To specify a file number

While holding down the FUNCTION button, use the

Select Music Library Song number keys (0 through 9) to

specify the file number (1 to 99) you want.

(TAKE01.WAV, TAKE02.WAV, etc.)

The Digital Piano beeps if a file with the specified

number does not exist.

To start playback, press the a button.

• To stop song play, press the a button.

■ To delete an audio file from a USB flash drive

Files can be deleted one at a time.

IMPORTANT!

• Note that the file (recorded data) delete operation

cannot be undone.

Press the AUDIO REC button once or twice so the

AUDIO REC lamp is lit.

This enters playback standby.

Select the song you want to delete.

If you want to delete the last file you recorded, jump

directly to step 3.

● To select the previous song

Hold down the FUNCTION button and press the Select

Music Library Song minus (–) key.

Each press scrolls back one song.

● To scroll in file number sequence

Hold down the FUNCTION button and press the Select

Music Library Song plus (+) key.

Each press scrolls forward one song.

● To specify a file number

While holding down the FUNCTION button, use the

Select Music Library Song number keys (0 through 9) to

specify the file number (1 to 99) you want.

(TAKE01.WAV, TAKE02.WAV, etc.)

The Digital Piano beeps if a file with the specified

number does not exist.

Press the AUDIO REC button so the AUDIO REC

lamp is flashing.

Hold down the AUDIO REC button until the AUDIO

REC lamp lights.

This enters delete standby, which is indicated by the L

and R lamps flashing.

Hold down the FUNCTION button and press the

a button.

This deletes the file and enters audio recorder playback

standby.

• To exit the above operation at any point, press the

AUDIO REC button once or twice so the AUDIO

REC lamp is unlit.

NOTE

• The file number of the file you delete remains unused

(remaining files are not renumbered). Recording a new

file causes the file number that comes after the last file

recorded to the USB flash drive to be assigned to the new

file.

The information below shows how the lamps indicate the error type by flashing or lighting when an error occurs due to data

transfer failure or some other reason.

Error Indicators

Lamps Error Type Cause Action

No Media 1. The USB flash drive is not

connected to the USB flash

drive port.

1. Correctly plug the USB

flash drive into the USB

flash drive port.

2. The USB flash drive was

removed while some

operation was in progress.

2. Do not remove the USB

flash drive while any

operation is in progress.

3. The USB flash drive is

write-protected.

3. Write-enable the USB flash

drive.

4. The USB flash drive is

protected by anti-virus

software.

4. Use a USB flash drive that

is not protected by anti-virus

software.

No File There is no loadable file in the

“MUSICLIB” folder or no

playable file in the “AUDIO”

folder.

Move the file you want to load

into the appropriate location in

the “MUSICLIB” or “AUDIO”

folder.

For information about folders,

refer to the “User’s Guide

(Full)”.

No Data You are attempting to save

data to a USB flash drive when

there is no data to save.

Record something before

performing a save operation.

Read Only A read-only file with the same

name you are trying to use is

already stored on USB flash

drive.

Change the name and then

save the new data.

Remove the read-only attribute

from the existing USB flash

drive file and overwrite it with

the new data.

Use a different USB flash drive.

Media Full There is not enough space

available on the USB flash

drive.

Delete some files from the USB

flash drive to make room for

new data or use a different USB

flash drive.

File Full 1. There are too many files on

the USB flash drive.

1. Delete some of the files on

the USB flash drive to make

room for new data.

2. There is a file named

TAKE99.WAV in the

“AUDIO” folder.

2. Delete the WAV file from

the “AUDIO” folder.

Wrong Data 1. The USB flash drive data is

corrupted.

–

2. USB flash drive contains

data that is not supported

by this Digital Piano.

Format 1. The USB flash drive format

is not compatible with this

Digital Piano.

1. Format the USB flash drive

on the Digital Piano.

2. USB flash drive memory is

corrupted.

2. Use a different USB flash

drive.

Media R/W USB flash drive memory is

corrupted.

Use a different USB flash drive.

Size Over The data on the USB flash drive

is too big to play.

This Digital Piano supports

playback of song data files with

a maximum size of 90 kbytes.

Troubleshooting

If this happens: Do this:

No sound is produced when I

press a keyboard key.

1. Rotate the VOLUME knob more towards “MAX”.

2. Disconnect whatever is connected to the PHONES/OUTPUT jack.

3. Turn on the Local Control setting. For details, refer to the “User’s Guide (Full)”.

The pitch of the Digital Piano

is off.

1. Change the transpose setting to “0”. Or turn power off and then back on.

2. Change the tuning setting to 440.0 Hz. Or turn power off and then back on.

3. Change the octave shift setting to “0”. For details, refer to the “User’s Guide (Full)”.

4. Change the temperament setting to “00: Equal”.

Nothing happens when I press

a pedal.

Check the orientation of the pedal unit plug and makes sure it is inserted as far as it goes.

For the correct plug orientation, see “To connect the cables” under “Assembling the

Stand” of page 4/4 of these instructions.

Tones and/or effects sound

strange. Turning power off and

then back on again does not

eliminate the problem.

Example: No change in

intensity when key press

pressure (touch) is changed

Turn off Auto Resume, and then turn power off and then back on again. For details, refer

to the “User’s Guide (Full)”.

A tone’s quality and volume

sounds slightly different

depending where it is played

on the keyboard.

This is an unavoidable result of the digital sampling process,* and does not indicate

malfunction.

* Multiple digital samples are taken for the low range, middle range, and high range of

the original musical instrument. There may be a very slight difference in tonal quality

and volume between sample ranges.

When I press a button, the

note that is sounding cuts out

momentarily or there is a

slight change in how effects

are applied.

This happens while multiple parts are sounding at the same time while using layer, using

the Duet Mode, playing back a built-in tune, recording, etc. Pressing a button when one of

these conditions exists causes the effect setting that is built into the tone to change

automatically, which causes notes to cut out momentarily or a slight change in how

effects are applied. It does not indicate malfunction.

I need to reset all Digital Piano

data and settings to their

initial defaults.

Hold down the FUNCTION, MIDI REC and GRAND PIANO 2 buttons, and press the

power button to turn on power.

I need to reset a specific

setting to its initial default.

Hold down the FUNCTION button and press the + and – keyboard keys of the setting at

the same time.

Lamps Error Type Cause Action

• Specifications and designs are subject to change without notice.

Product Specifications

Model AP-470BK/AP-470BN/AP-470WE

Keyboard 88-key piano keyboard, with Touch Response

Maximum Polyphony 256 notes

Tone 22 types

• Layer (excluding bass tones)

Acoustic Simulator Damper Resonance (Damper Noise on/off), Hammer Response, String Resonance,

Lid Simulator, Key Off Simulator, Key On Action Noise, Key Off Action Noise

Effects Brilliance (–3 to 0 to 3), Hall Simulator (4 types), Chorus (4 types), DSP,

Head Phone Mode, Volume Sync Equalizer

Metronome • Beats: 0 to 9

• Tempo range: 20 to 255

Duet Mode Adjustable tone range (–2 to 2 octaves)

Concert Play • Songs: 10

• Song volume: Adjustable

• Part On/Off: L, R (Lesson Mode only)

• 3 Modes: LISTEN, LESSON, PLAY

Music Library • Songs: 60; 10 download songs (Up to approximately 90 KB per song,

up to approximately 900 KB/10 songs total)*

* Based on 1 KB = 1024 bytes

• Song volume: Adjustable

• Part On/Off: L, R

Recorder MIDI Recorder

• Modes: Real-time recording, playback

• Songs: 1

• Tracks: 2

• Capacity: Approximately 5,000 notes total

• Recording storage: Built-in flash memory

Audio Recorder

• USB flash drive real-time recording and playback; Linear PCM, 16bit, 44.1 kHz,

stereo .WAV format

• Songs: 99 files

• Approximately 25 minutes maximum recording per file.

• Audio file volume: Adjustable

Pedals Damper (seamless half-pedal support), sostenuto, soft

Other Functions • Touch Response: 3 levels, Off

• Transpose: 2 octaves (–12 to 0 to +12)

• Tuning: 415.5 Hz to 440.0 Hz to 465.9 Hz (0.1 Hz steps)

• Temperament: Equal + 16 other types

• Octave Shift: 4 octaves (–2 to 0 to +2)

• Panel Lock

MIDI 16-channel multi-timbre receive

USB Memory • Supported capacity: 32 GB or less recommended

• Functions: SMF playback, recorded song storage, song data import, formatting,

audio data playback and storage

Input/Output Terminals • PHONES/OUTPUT jacks: Stereo standard jacks × 2

• AC Adaptor Terminal: 24 VDC

• USB port: Type B

• USB flash drive port: Type A

• Pedal connector

Speakers φ12cm × 2 + φ4cm × 2 (Output: 20W + 20W)

Power Requirements AC adaptor: AD-E24250LW

• Auto Power Off: Approximately 4 hours; Can be disabled.

Power Consumption 24V = 20W

Dimensions Piano and Stand: 141.7(W) × 42.7(D) × 86.1(H) cm (55 13/16 × 16 13/16 × 33 15/16 inches)

Weight Piano and Stand: Approximately 43.4 kg (95.7 lbs)

Your Digital Piano can connect with a smartphone, tablet, or other smart device. A special app is available that lets you use

your smart device to perform piano operations, and view music scores* and commentary for built-in songs.

* Excluding Concert Play songs.

Go to the website below to download the app and install it on your smart device.

http://web.casio.com/app/en/

Linking with an Application (APP Function)

Downloading the Special App

Included Accessories

● AC adaptor

● Power cord

● Music Stand

● Leaflets

• Safety Precautions

• Other (Warranty, etc.)

Items included as accessories are subject to change

without notice.

Separately Available Accessories

• You can get information about accessories that are

separately for this product from the CASIO catalog

available from your retailer, and from the CASIO

website at the URL below.

http://world.casio.com/

Continued on sheet 3/4 

[Continued below left]

AP470_EN.fm 2 ページ２０１７年１０月１３日　金曜日　午前１０時２２分