User Manual

4/4USER’S GUIDE
• Before starting assembly, check to make sure that you have all the parts shown below.
• This stand does not include any of the tools required for assembly. It is up to you to prepare a large Phillips head (+)
screwdriver for assembly.
IMPORTANT!
• Do not remove the tape securing the keyboard cover in place until assembly is complete. Removing the tape can
cause the keyboard cover to open and close during assembly, creating the risk of personal injury to your hands
and fingers.
• Do not use any screws other than those that come with the stand. Doing so risks damage to the stand and/or
Digital Piano.
• You can find the screws in a plastic bag inside the packing material.
• If screws are missing or damaged, contact your local CASIO service provider.
*Caution!
• To assemble the stand, at least two persons should work together on a flat surface.
• Take care that you do not pinch your fingers between parts when assembling them.
• Spread felt or some other type of cloth under the bench to avoid direct contact between the rubber at the tips of the legs
and the floor surface. Direct contact between the rubber and flooring can cause discoloration, marring, or other damage to
the flooring.
• When placing the Digital Piano on the floor, be sure to place it on something soft (a blanket, cushion, etc.) Do not place the
Digital Piano directly onto the floor.
Assembling the Stand
Part Quantity

4

6

2

4

4

1

1

1
A
B
C
D
1. Attach crosspiece

to side panels

and

.
Secure the side panels using four

screws.
• When attaching at location

, make sure that
bracket

enters into crosspiece

as far as it will
go. If it doesn’t, the

screws will not be able to
reach the screw holes of the bracket

, which can
cause stripping of the screw threads.
• Cover each of the four screws with screw caps

.
• Run the pedal cable out through crosspiece

.
2. Attach the back panel

to the brackets

of the
two side panels. Secure the back panel using two

screws.
IMPORTANT!
• When installing the back panel

, make sure the
screw holes at the bottom are positioned correctly.
– Longer hole distance: Side panel

side
– Shorter hole distance: Side panel

side
• When attaching at location

, pass the

screw
through the hole of a

clip before installing the
screw.
3. Install six

screws along the bottom of the back
panel

.























Longer distance
Step 1. Pedal cable
Shorter distance
J
G
G
4
3
4. Adjust the height adjustment screw

to provide
support so crosspiece

does not bow downwards
when the pedals are pressed.
IMPORTANT!
• Pressing the pedals without adjusting height
adjustment screw

can result in damage to
crosspiece

. Be sure to adjust height adjustment
screw

before operating the pedals.
5. Place the piano onto the stand.
• Slide the piano onto the stand from behind so the
bolts on the bottom of the piano engage with the
slots of stand brackets.
• The sides of the piano will overhang the left and
right side panels slightly. Adjust the piano position
so the left and right overhang is the same.
6. Use two

bolts to secure the piano to the stand.
IMPORTANT!
• To avoid the risk of the piano from falling off the
stand, be sure to tighten the bolt securely.
1. With the pedal unit cable plug oriented as shown in
the illustration below, plug it into the pedal
connector on the bottom of the piano.
a. Push the plug fully in as far as it goes.
b. Use the

clip to secure the pedal cable to side
panel

.




Bracket slot
Piano
Side panels
To connect the cables
J
a.
b.
2. Plug the AC adaptor that comes with the digital
piano (24 VDC) into the AC adaptor terminal. Plug
the power cord of the AC adaptor that comes with
the Digital Piano into a household power outlet as
shown in the illustration below.
• Secure the AC adaptor cord by hooking it onto the
hook next to the AC adaptor terminal.
1. Insert the tabs on the bottom of the music stand
into the two holes on the top of the piano.
1. Insert the headphones hook

into the two holes
on the bottom of the piano.
2. Use screw

to secure the headphones hook in
place.
AC adaptor plug
AC adaptor unit
Household power outlet
Supplied power cord
Hook
Attaching the Music Stand
Install the Headphones Hook
K
L
Protective tape is affixed to the front edges of the keyboard
keys to protect them during shipment. Remove the
protective tape before using the digital piano.
• Peel off the tape by pulling carefully towards you as
shown in the illustration.
• If some keys seem to be raised up after you remove the
tape, press down to return them to their normal positions.
IMPORTANT!
• Use both hands whenever opening or closing the lid,
and take care that you do not close it on your fingers.
• Do not open the lid too wide. Doing so creates the
risk of damage to the cover and digital piano.
• Stand in front of the digital piano on the right side
when opening or closing the lid.
■ To open the lid
1. Lift up the lid as shown in the illustration.
• The lid has a support bracket (indicated by the star
 in the illustration) attached to its inside surface.
Check to make sure that the support bracket is
standing up fully.
■ To close the lid
1. Carefully lift up slightly on the lid.
2. Use the fingers of your left hand to press back on
the support bracket () as you slowly and carefully
lower the lid.
Removing the Protective Tape from the
Keyboard
Opening and Closing the Piano Lid
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
IMPORTANT SAFETY INSTRUCTIONS
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one
wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the
third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the
point where they exit from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with
the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to
avoid injury from tip-over.
13. Unplug this apparatus during lightning storms or when unused for long periods of time.
14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in
any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the
apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall
be placed on the apparatus.
The power indicator being unlit does not mean the apparatus is completely disconnected from the MAINS.
When you need to have the apparatus completely disconnected from the MAINS, you must unplug the power cord. For
that purpose, locate the apparatus in a way that secures easy access to the power cord.
NOTICE
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
FCC CAUTION
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s
authority to operate the equipment.
Declaration of Conformity
Model Number: AP-470
Trade Name: CASIO COMPUTER CO., LTD.
Responsible party: CASIO AMERICA, INC.
Address: 570 MT. PLEASANT AVENUE, DOVER, NEW JERSEY 07801
Telephone number: 973-361-5400
This device complies with Part 15 of the FCC Rules, Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Important!
Please note the following important information before using this product.
• Before using the AD-E24250LW Adaptor to power the unit, be sure to check the AC Adaptor for any damage first.
Carefully check the power cord for breakage, cuts, exposed wire and other serious damage. Never let children use an
AC adaptor that is seriously damaged.
• The product is not intended for children under 3 years.
• Use only CASIO AD-E24250LW adaptor.
• The AC adaptor is not a toy.
• Be sure to disconnect the AC adaptor before cleaning the product.
■ About the AC adaptor that comes with the Digital Piano
Note the following important precautions to avoid damage to the AC adaptor and power cord.
• Never pull on the cord with excessive force.
• Never repeatedly pull on the cord.
• Never twist the cord at the base of the plug or connector.
• Before moving the Digital Piano, be sure to unplug the AC adaptor from the power outlet.
• Loop and bundle the power cord, but never wind it around the AC adaptor.
Manufacturer:
CASIO COMPUTER CO., LTD.
6-2, Hon-machi 1-chome, Shibuya-ku, Tokyo 151-8543, Japan
Responsible within the European Union:
Casio Europe GmbH
Casio-Platz 1, 22848 Norderstedt, Germany
www.casio-europe.com
Declaration of Conformity According to EU Directive
Company and product names used in this manual
may be registered trademarks of others.
This recycle mark indicates that the packaging conforms to
the environmental protection legislation in Germany.
AC Adaptor Handling Precautions
Model: AD-E24250LW
1. Read these instructions.
2. Keep these instructions on hand.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this product near water.
6. Clean only with a dry cloth.
7. Do not install near radiators, heat registers, stoves, or any other source of heat (including amplifiers).
8. Use only attachments and accessories specified by the manufacturer.
9. Refer all servicing to qualified service personnel. Servicing is required after any of the following occurs: when the
product is damaged, when the power supply cord or plug is damaged, when liquid is spilled into the product, when
a foreign object falls into the product, when the product is exposed to rain or moisture, when the product does not
operate normally, when the product is dropped.
10. Do not allow the product to be exposed to dripping or splashing liquid. Do not place any object containing liquid on
the product.
11. Do not allow the electrical load output to exceed the label rating.
12. Make sure the surrounding area is dry before plugging into a power source.
13. Make sure the product is oriented correctly.
14. Unplug the product during lightning storms or when you do not plan to use it for a long time.
15. Do not allow product ventilation openings to become blocked. Install the product in accordance with the
manufacturer’s instructions.
16. Take care the power cord is located where it will not be stepped upon or bent severely, particularly in locations
close to plugs and convenience receptacles, and in locations where it exits from the product.
17. The AC adaptor should be plugged into a power outlet as close to the product as possible to allow immediate
disconnection of the plug in case of emergency.
The symbol below is an alert indicating un-insulated hazardous voltage inside the product’s enclosure, which may be
sufficient to constitute the risk of electric shock to users.
’
The symbol below is an alert indicating the presence of important operating and maintenance (servicing) instructions in
the documentation that accompanies the product.
*
• Any reproduction of the contents of this manual, either in part or its entirety, is prohibited. Except for your own, personal
use, any other use of the contents of this manual without the consent of CASIO is prohibited under copyright laws.
• IN NO EVENT SHALL CASIO BE LIABLE FOR ANY DAMAGES WHATSOEVER (INCLUDING, WITHOUT
LIMITATION, DAMAGES FOR LOSS OF PROFITS, BUSINESS INTERRUPTION, LOSS OF INFORMATION)
ARISING OUT OF THE USE OF OR INABILITY TO USE THIS MANUAL OR PRODUCT, EVEN IF CASIO HAS BEEN
ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
• The contents of this manual are subject to change without notice.
MA1710-A Printed in China
C
AP470_EN.fm 4 ページ ２０１７年１０月１３日 金曜日 午前１０時２２分