User`s guide

E-18
18 DC Jack The dedicated optional AC adaptor is connected to this jack.
19 Barcode Reader Laser light or LED light is emitted from this window that reads
bar codes.
SD Card Slot
(for IT-800R-05/EC-05/
RGC-05)
SD card slot.
20 IR Port Used for communication with another Handheld Terminal.
21 Power/Signal
Terminals
Used to receive power provided by the USB Cradle or Ethernet
Cradle. Also used for data communication.
22 Strap Holes Used to attach neck strap and hand belt.
23 Camera Lens
(Camera models)
Takes photos.
24 LED
(Camera models)
Used for taking photos.
25 Car Mounted-type
Battery Charger
Mount Holes
These holes hold the terminal seating in the optional car
mounted-type battery charger.
26 Reset Switch Used to reset the Handheld Terminal.
27
microSD Card Slot
(for IT-800R-15/RC-15/
RGC-15/R-35/A-35/
RC-35/RGC-35/EC-05)
microSD card slot. (Remove the battery pack to load a card.)
28 Battery Pack Cover Used to cover the battery compartment that holds the battery
pack inside.
29
Cradle Mount Holes These holes hold the terminal seating in the optional cradle or
in the cradle-type battery charger.
30 SIM Card Slot
(for IT-800RGC-05/
RGC-15/RGC-35)
SIM card slot. Remove the battery pack to load and unlaod SIM
card.
31 Battery Pack Cover
Lock Switches
Used to lock the battery cover and to release.
32 Extension Port Provided for future extension.
33 Stylus It is used to operate the terminal or to input data.
34 Hand Belt It is used to hold the terminal or to carry it.
* Antenna of the NFC is laid underneath of the screen frame for communication with card.