User`s guide

E-37

Handling microSD Cards

The Handheld Terminal supports microSD card.

The employment of microSD card slot is dependent on model. See page 18 for the

models with microSD card slot integrated.

Since the microSD card slot is located inside the battery pack compartment, ﬁ rst

remove the battery pack when installing or removing a microSD card.

Refer to pages 19 to 21 for information on “Loading and Removing the Battery Pack”.

Install (or remove) a microSD card according to the procedure described below.

Installing

1. Make sure that the power on the terminal has been switched off. If the power is still

on, press the power key to switch off.

2. Remove the battery pack.

3. Insert microSD card with the description side face up.

Make sure that the card is pushed into the slot until the small plastic spring plate is

rebounded so that the plate can ﬁ rmly lock the card in the slot.

Avoid inserting the card diagonally.

4. Load the battery pack.

•