User`s guide

E-52
4. Connect the USB cable (DT-380USB) to the USB client port on the back of the USB
Cradle, and then connect it to the PC.
The USB host port is used for connecting the cradle with other USB peripheral device.
PC
USB peripheral device
5. Align the cradle mount holes on the back of the IT-800 with the mount hooks on the
cradle after aligning the terminals on the bottom of the IT-800 with the power/signal
terminals of the cradle.
The power indicator LED on the front of the USB Cradle will light green if the
IT-800 has been properly mounted.
Status of Indicator 1 on IT-800:
Orange: Charging the battery pack.
Red: Standby due to battery pack error or the surrounding temperature is out of the
charging temperature range.
(charging begins when the temperature is within the charging temperature range)
Green: Charging the battery pack is complete.