User`s guide

E-61
Connecting the Cradle-type Battery Charger Power Supply
Use the optional AC adaptor (AD-S15050B) for the power supply of the Cradle-type
Battery Charger.
1. Plug the AC adaptor into the AC adaptor jack on the back of the Cradle-type Battery Charger.
2. After connecting the power cable to the AC adaptor, plug the other end of it into an
electrical outlet.
3. Align the cradle mount holes on the back of the IT-800 with the mount hooks on
the charger after aligning the terminals on the bottom of the IT-800 with the power
terminals of the charger.
The power indicator LED on the front of the Cradle-type Battery Charger will light
green if the IT-800 has been properly mounted.
Status of Indicator 1 on IT-800:
Orange: Charging the battery pack.
Red: Standby due to battery pack error or the surrounding temperature is out of the
charging temperature range.
(charging begins when the temperature is within the charging temperature range)
Green: Charging the battery pack is complete.