User`s guide

E-62
Important !
Never short out the power contacts of the Cradle-type Battery Charger. This
can damage the Cradle-type Battery Charger.
Allowing the power contacts become wet can cause an electric shock or fi re. In
addition, if the contacts become soiled, contact may be impaired resulting in
poor charging. For reasons of safety and maintaining charging battery pack(s)
in optimum condition, clean the power contacts by wiping with a dry cloth or
cotton swab after disconnecting the AC adaptor.
When placing the IT-800 into the cradle, make sure that it is seated properly
and that the power LED at the front of the Cradle-type Battery Charger is lit in
green. Charging and communication will not proceed properly if the Handheld
Terminal is not seated properly.
Specifi cations
1. Charging Specifi cations
Charging Method: Constant current/voltage (the charging circuit is built in IT-800)
Charge Period: Approximately 4 hours (battery pack)
Approximately 7 hours (large-capacity battery pack)
2. Power Supply
Power Source: AC adaptor (AD-S15050B)
Consumption Current: 12V DC 2.6A
Output to Handheld Terminal: 9.5V DC 2.7A (max.)
3. AC Adaptor
Model: AD-S15050B
Input: 100V to 240V AC 50/60Hz 0.4A
Output: 5V DC 3.0A
4. Dimensions and Weight
Dimensions: Approximately
116(W)
×
111.5(D)
×
83.5(H) mm
(4
9
⁄
16
"W
×
4
3
⁄
8
"D
×
3
5
⁄
16
"H)
Weight: Approximately 260g (9.2oz)
5. Operating Environment
Temperature: 0°C to 40°C (32°F to 104°F)
Humidity: 10% to 90% RH (non-condensation)
•
•
•