User`s guide

E-63
Using the Car Mounted-type Battery Charger (HA-H35CHG)
The optionally available Car Mounted-type Battery Charger (HA-H35CHG) can be
used to charge the battery installed in the Handheld Terminal using power from the
cigarette lighter in your car.
General Guide
Top
4
Front
3
6
2
5
2
Right
2
1
1 Car Adaptor Jack Connect the Car Power Cable (bundled) here.
2 Removal Buttons Press when removing the IT-800.
3 Terminal Detect
Switch
This switch detects when the IT-800 is mounted correctly on the
charger.
4 Power Terminals Power is supplied to the IT-800 via these contacts.
5 Power Indicator
LED
This LED indicates the power status and the mountting status of
the IT-800.
Off: IT-800 is not installed
Green: Power on, IT-800 mounted correctly
6 Mount Hooks These hooks are used to stabilize the Handheld Terminal when
mounting it on the Car Mounted-type Battery Charger.
Before the use of this charger for battery pack installed in WWAN models, see the
battery charge instruction on page E-22.