Operating Instructions

Contacts in Your Phone’s Memory
G’zOne TYPE-S 41 G’zOne TYPE-S 40
the Default Number. If more than one number is saved in
a Contact entry, another number can be saved as the
Default Number.
NOTE
The Default Number cannot be deleted by itself. The entire
Contact entry can be deleted or another number can be set
as the Default Number allowing you to delete the original
saved number and keep the Contact entry.
Changing the Default Number
1. From standby mode, press Right Soft Key
[Contacts]. Your Contacts display alphabetically.
2. Press Navigation Key up or down to highlight the
Contact entry you want to edit, then press Left Soft
Key [Edit].
3. Press Navigation Key up or down to highlight the
phone number you want to set as the Default Number,
then press Right Soft Key [Options].
4. Press Navigation Key up or down to highlight
Set As Default, then press Center Select Key
[OK].
5. Press Navigation Key up or down to select Yes.
6. Press Center Select Key [OK].
A confirmation message appears.
7. Press Center Select Key [SAVE] to save.
Editing Stored Phone Numbers
1. From standby mode, press Right Soft Key
[Contacts]. Your Contacts display alphabetically.
2. Press Navigation Key up or down to highlight the
Contact entry you want to edit, then press Left Soft
Key [Edit].
3. Press Navigation Key up or down to highlight the
phone number.
4. Edit the phone number as necessary, then press
Center Select Key [SAVE].
Editing Stored Names
1. From standby mode, press Right Soft Key
[Contacts]. Your Contacts display alphabetically.
2. Press Navigation Key up or down to highlight the
Contact entry you want to edit, then press Left Soft
Key [Edit].