Operating Instructions

Contacts in Your Phone’s Memory
G’zOne TYPE-S 45 G’zOne TYPE-S 44
code. There are two different types of pauses you can
use when storing a number:
Wait (W)
The phone stops dialing until you press Left Soft Key
[Release] to advance to the next number.
2-Sec Pause
The phone waits 2 seconds before sending the next
string of digits.
Storing a Phone Number with Pauses
1. From standby mode, enter the phone number.
2. Press Right Soft Key [Options].
3. Press Navigation Key up or down to select
pause type, then press Center Select Key [OK].
2-Sec Pause / Wait
4. Enter additional number(s) (e.g., pin number or credit
card number).
5. Press Right Soft Key [Options].
6. Press Navigation Key up or down to select Save
to Contacts then press Center Select Key [OK].
7. Press Navigation Key up or down to
select Create New or Update Existing, then press
Center Select Key [OK].
8. Press Navigation Key up or down to select the
type of phone number, then press Center Select Key
[OK].
9. Enter a name (up to 32 characters), then press Center
Select Key [SAVE].
A confirmation message appears.
Adding a Pause to an Existing Number
1. Press Right Soft Key [Contacts].
2. Press Navigation Key up or down to highlight the
Contact entry to edit, then press Left Soft Key
[Edit].
3. Press Navigation Key up or down to highlight the
number.
4. Press Right Soft Key [Options].
5. Press Add Pause.
6. Press Wait or 2-Sec pause.
7. Enter additional number(s), then press Center Select
Key [SAVE]. A confirmation message appears.