Operating Instructions

1.3 Call from Keypad (Barge)

1. Enter the 10-digit wireless number of the Verizon

Wireless PTT subscriber you wish to contact.

2. Press and hold PTT Key . Listen for the 'OK to Talk'

tone. The message 'Connected to' will appear on the

display. Speak while pressing the PTT Key .

If the wireless number you entered is included in your

PTT contact list, the contact name will replace the

wireless number entered on the display when the call

is initiated.

3. Release PTT Key when finished speaking. This

allows the called party to reply.

4. Press to end the call.

1.4 Call from Keypad (Alert)

1. Enter the 10-digit wireless number of the Verizon

Wireless PTT subscriber you wish to alert.

2. Press Left Soft Key [Alert].

3. Press and release PTT Key to alert the individual.

The 'PTT Outgoing Alert' tone sounds, and 'Alerting'

appears on the display.

If the wireless number you entered is included in your

PTT contact list, the contact name will replace the

Push to Talk

G’zOne TYPE-S

wireless number entered on the display when the alert

is initiated.

If the called party answers the alert, 'Listening' appears

on the display and you will hear the called party speaking.

If the called party chooses to ignore the alert, or if the

phone is unavailable to accept a PTT call, an

'unavailable' message will appear on your display.

5. When the called party is finished speaking, you will

hear the 'Floor Available' tone and the 'Connected'

screen will appear on your display.

6. Press and hold PTT Key to talk.

7. Release PTT Key to listen.

8. Press to end the call.

2. Incoming PTT Call

2.1 Incoming PTT (Barge)

1. When your phone receives a barge call, the 'Barge'

tone plays. You then hear the calling party speaking

through the speakerphone. The calling party's wireless

number will appear on your display. If the calling

party's number is saved in your PTT Contact List the

contact name will replace the wireless number on the

display.