Operating Instructions

SETTINGS & TOOLS
G’zOne TYPE-S 147 G’zOne TYPE-S 146
Unlock The phone is never locked (Lock mode
can be used).
On Power Up The phone is locked when it is turned
on.
• Location On / E911 Only
Location On Your location is now available to the
network.
E911 Only Your location will be hidden from
network & application except 911
6.4.3 Restrict Calls
1. Press Center Select Key [MENU],Navigation Key
right twice for SETTING & TOOLS,
Phone Settings, Security.
2. Enter the four-digit lock code, then press Center
Select Key [OK].
NOTE
The default Lock Code is the last 4 digits of your mobile
telephone number.
3. Press Restrict Calls.
4. Press Navigation Key up or down to select one
of the following setting, then press Center Select Key
[OK].
Code Enabled / Code Disabled
6.4.4 Edit Code
1. Press Center Select Key [MENU],Navigation Key
right twice for SETTING & TOOLS,
Phone Settings, Security.
2. Enter the four-digit lock code, then press Center
Select Key [OK].
NOTE
The default Lock Code is the last 4 digits of your mobile
telephone number.
3. Press Edit Code.
NOTE
If Common Code is set to Off, press Device or
Location.If Location is selected, you will need to
enter your lock code.
4. Enter the new four-digit code in the New Code field.
5. Press Navigation Key down to advance to the
Confirm Code field. Enter the new four-digit code
again as confirmation.
6. Press Center Select Key [OK].
The following message appears to confirm the change